Kimber 84M 22 Creed

SJB358

Ballistician
Dec 24, 2006
33,108
4,998
I bought a couple Kimbers (308 84M and 30-06 84L) expressly to makes into a 22 Creed and the other donor was used for a 7x57.

But I also ordered Lilja 1-7 twist 84M Modified barrels. The modified barrels add a bit of weight up front from a standard Kimber barrel.

I sent them off to Smith Custom Guns in Warren, Pa. They made it back in 3-4 months. Can’t remember exactly but the wait wasn’t too bad.

IMG_3452.jpeg

Being that it’s November and I wanted to hunt with them, I did some quick load work in order to blow out some brass and get into the ballpark with a load. I typically don’t go nuts with load work on a new barrel and using brand new brass. But, it’s November..

IMG_3495.jpeg


IMG_3502.png
 
Last edited:
IMG_3487.jpeg

IMG_3517.jpeg

Those 5 shots were from 42-44 grains. 44 seemed like a fair place to start so that’s what I loaded. For now, I’ll let that load ride until I blow through my brass, but man, who doesn’t love fast 22’s….

It’s sorta funny everyone questions how well 22’s work, but the bullets used in the 22 Creed are heavier than most used in the old 250 Savage back in the day it was making its debut, and they only get better from the muzzle on out!
 
there are a lot of good gunsmiths in PA .looks like you have 2 nice rifles in your possession . showing lots of potential . looking forward to next summer, when we see the real load work ups .
 
Nicely done Scotty. Those two rifles will be shooters with some load work. They are already there and you haven’t even started yet! Congrats buddy.

JD338
 
Back
Top