Loads for 264 Win Mag with the 130 gr Accubond

Lenny · Feb 14, 2008

I'm looking for loads for my 264 Win mag with the 130gr AccuBond? I have used 120gr Bt, 125gr pt and 140gr Pt with powders such as H4831, and IMR7828 with top velosities. POP, had posted great results awhile back with H1000, 70.5gr??? at 3300fps but I can't seem to find the post. Help!!! Do any of you 264 win mag fans have any sugguestions?

Thanks
Lenny

reflex264 · Feb 14, 2008

Here are my loads that I sent POP. Back off and work up. These should be consdiered maximum loads. Both shooting little bitty groups. Enjoy. reflex264

130AB 68.0grs Magnum CCI250 3250fps favorite load
130AB 67.4grs IMR7828 CCI250 3350fps

FOTIS · Feb 14, 2008

Try Reloader 25 too! Start at 62 and work up.

RogueRiver · Feb 15, 2008

Lnny just wondering hat your loads are for 7828 and 4831

J300UM · Feb 16, 2008

Mine shoots very well with 68gr 7828ssc. Velocities were only in the 3200-3250 range but I only have a 24" barrell. I loaded up to 72gr without showing excessive pressure but started to loose accuracy. If you have a 26" barrell I would take Pop's advise and try RL25. That seems to work well in most of the belted magnums.

RogueRiver · Feb 17, 2008

I do have a 26" barrel, I started with RL25 but found 7828 shot a little better, I am thinking of trying H4831

Lenny · Feb 27, 2008

Hello Rogue River
My top loads were 125gr NP- 66gr H4831 CCI250 (3350 fps), 140gr NP- 66 IMR 7828 CCI 250 (3150 fps). My gun is a sako AV hunter with a 26" douglas barrel. Groups were 1/2 -3/4 at 100yds, 3/4-1 1/4 at 200yds. This fall I shot a nice ten point whitetail at 230yds with the 125 NP load, and it dropped him in his tracks. I'm currently doing load development with 130 grs AB. Can't wait to try it out.

Lenny