No load data for >60gr for.223rem in Nosler Reloading Gui

[RidgeRunner]

Why is there no load data for bullets heavier than 60gr for the .223 Remington in the Nosler Reloading Guide 5th Ed ? Where can I get that data?

 

[ramori]

Why is there no load data for bullets heavier than 60gr for the .223 Remington in the Nosler Reloading Guide 5th Ed ? Where can I get that data?

Try 'ammoguide.com'. Say a 80 grain Nosler w/ 24.7 grains Varget, etc.

 

[Ol` Joe]

Why is there no load data for bullets heavier than 60gr for the .223 Remington in the Nosler Reloading Guide 5th Ed ? Where can I get that data?

Try the manufactures web site of the bullet you are useing, or go to one of the powder companies sites. The powder makers have data for most avialable bullet wgts. Remember the bullet producers data is for that specific bullet first and the wgt second. The powder companies will have data based on the bullet wgt if no specific bullet is listed as used. The bullet you are useing should be concidered generic if it isn`t the bullet used in the data and care should be used when approching max loads as they may be hot with your components.

 

[RidgeRunner]

Ill give them a try. Thanks guys.