Nosler 9mm 124 grain JHP

[Benny]

Anyone have load data on the nos. 9mm 124gr. using CFE pistol. My manuals don't show CFE 223 and my Hodgdon book doesn't show anything similar using CFE

 

[Dwh7271]

Hodgdons site says 4.9 gr min, 5.4 max

 

[Benny]

Hodgdons site says 4.9 gr min, 5.4 max

Like I posted I have a Hodgdons manual, and the data your refering too is for a berry hollow based round nose bullet! But thank you

 

[Polaris]

Use your internets.

http://www.hodgdonreloading.com/data/pistol. 2 loads shown for 125 grain jacketed bullets.

 

[Dwh7271]

If they don't have your exact bullet find one of similar makeup and start at the bottom end and work up. At least that's how I do it with an unlisted bullet. :grin:

 

[Benny]

Use your internets.

http://www.hodgdonreloading.com/data/pistol. 2 loads shown for 125 grain jacketed bullets.

Yeah, except as my post states it's 124 hollow point

 

[JD338]

You can use the 125 gr load data for the 124 gr HP.
Just start low and work up.

JD338

 

[big rifle man]

Jim's right, I've done that on numerous occasions. Work up carefully and you'll come up with a satisfactory load.