Welcome to the forum. Here is what I see for that set up.. Just work up carefully from a few grains below. Your chronograph is your friend when using QL data.
Cartridge : .264 Win. Mag.
Bullet : .264, 129, Hornady Interbond 26209
Useable Case Capaci: 76.543 grain H2O = 4.970 cm³
Cartridge O.A.L. L6: 3.340 inch = 84.84 mm
Barrel Length : 26.0 inch = 660.4 mm
Powder : Vihtavuori N165
Predicted data by increasing and decreasing the given charge,
incremented in steps of 0.741% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
Cartridge : .264 Win. Mag.
Bullet : .264, 129, Hornady Interbond 26209
Useable Case Capaci: 76.535 grain H2O = 4.969 cm³
Cartridge O.A.L. L6: 3.340 inch = 84.84 mm
Barrel Length : 26.0 inch = 660.4 mm
Powder : Vihtavuori N170
Predicted data by increasing and decreasing the given charge,
incremented in steps of 0.68% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms