Quick load help please

[muzz]

Thank you! Thank all of you on this forum. a lot of good people on here with knowledge and willing to help. I love it here

 

[muzz]

Ok it looks like I got one pound of RL26 coming tomorrow.

150 gr AccuBond long range bullets, 24" barrel now whats the charge weights to start with and max?

 

[MAinAR]

Ok it looks like I got one pound of RL26 coming tomorrow.

150 gr AccuBond long range bullets, 24" barrel now whats the charge weights to start with and max?

This is for 27" barrel so pressure be close but fps will be down bout 125fps......but you get the jest of where to work from..............guessing here but target velocity be about 3070 in 24" barrel

viewtopic.php?f=4&t=30225

 

[muzz]

Should I go with 215m primers or 210m primers? Or is there better ones to use ?

 

[DrMike]

The F210 will provide sufficient brisance to ignite the entire powder column. Just bear in mind that if you work up with any change in components you will need to ensure that pressure is not affected. Switching from regular rifle to magnum primers will generate slightly more velocity at measurably higher pressure.

 

[muzz]

So from what I am seeing if I went to 63.5 grains of rl26 I shouldn't have pressure problems?

I know to go up slow and keep an eye for pressure but it seems low for pressure for grains of powder.