Quickload data 338 win mag 200 Nosler BT 24" barrel At 62K?

[preacher]

Looking for some loads for the 200gr bullets? I have Federal 200 Tipped monos, Speer 200 and Nosler 200 BT. Thanks

 

[SJB358]

Looking for some loads for the 200gr bullets? I have Federal 200 Tipped monos, Speer 200 and Nosler 200 BT. Thanks

What about Nosler data, they have pretty good powders and seems like full power data last I looked. Which powders are you looking to use?

 

[preacher]

Agree, them and Barnes plus the online Hodgdon Load Center have good data. I was mainly looking at Ramshot powders and R17. I couldnt seem to find older posts with the Search feature. This rifle is about 30yrs old, never been used, clean bolt face and rifling! It has a Kreiger cut rifled in what looks like a Medium Sporter. I have some feelers out for anyuone who can skelentonize the action and flute the barrel, then ceracoat it maybe. If not, I;ll pack it like it is! ha

 

[SJB358]

I believe I’m around 70-72 grains of 17 under a 210 Swift for around 3k in my Alaskan Jim. I like 17 quite a lot in my 338’s.

 

[JD338]

Jim,

You might want to take a look here

About | Twisted Barrel

A Few Words From the Riflesmith I started machining in high school in 1988, and attended college in Torrington, Wyoming, for welding. […]

twistedbarrel.com

JD338

 

[SJB358]

Karl Kampfeld might also be able to work some magic as well.

 

[preacher]

Thanks, I'll check on them!

 

[preacher]

Well, I found out thatthe Sako action after its heat reated in Factory, its almost impossble to Skeletonize, /cant get it set up to Mill right either. However, I could always have to barrel reduced din diameter, but I'm not messing with it. I also can put a 1x4 or straight 6x on it and save a ton IF I feel I need to. I'm shooting it as is for now. Just got my Tract Toric 2-20 4" eye relief!