Nosler Reloading Forum
https://forum.nosler.com/

custom 6.5 PRC
https://forum.nosler.com/viewtopic.php?f=71&t=41939
Page 1 of 1

Author:  Thebear_78 [ Sun Mar 14, 2021 5:01 pm ]
Post subject:  custom 6.5 PRC

I picked up a custom 6.5 PRC the other day. I saw it on a local classified at a great price and couldn’t pass it up.

Image

Built by crescent custom rifles out of Kansas City, Mo.

Surgeon 591 WSM action
Bartlien marksman 5r 1-7 28” barrel
Manners elite PRS1 with mini chassis and barricade stop
Accurate mag WSM 5-7 round magazines
Trigger tech diamond straight shoe
Area 419 hellfire brake

I’m really looking forward to getting out to shoot some long range steel this summer.

Now I just need to find some component bullets. All I have found so far are 140 hybrid targets bullets.


Sent from my iPhone using Tapatalk

Author:  SJB358 [ Sun Mar 14, 2021 5:05 pm ]
Post subject:  Re: custom 6.5 PRC

Looks like a rifle that’ll be a ton of fun Bear!

Looks all business.

Author:  JD338 [ Sun Mar 14, 2021 8:30 pm ]
Post subject:  Re: custom 6.5 PRC

Nice looking rig. I bet she's a shooting machine.
What bullets are you looking for?

JD338

Author:  Thebear_78 [ Mon Mar 15, 2021 12:36 am ]
Post subject:  Re: custom 6.5 PRC

I’d like to find some hunting bullets for my Seekins havak 6.5 PRC. 142 LRAB, 140 accubond, 127 LRX. Hopefully this new PRC likes the Berger hybrid target 140s.


Sent from my iPhone using Tapatalk

Author:  6mm Remington [ Mon Mar 15, 2021 5:57 am ]
Post subject:  Re: custom 6.5 PRC

That's a fantastic looking rifle. Looks like it's shooting 1/2" groups or less just sitting there!!

David

Author:  the_wolf06 [ Mon Mar 15, 2021 7:27 am ]
Post subject:  Re: custom 6.5 PRC

Heck I can’t even find brass for mine right now... I got one of savages new high country rifles in 6.5 PRC in December and have been searching for brass ever since.


Sent from my iPad using Tapatalk

Author:  Thebear_78 [ Mon Mar 15, 2021 3:01 pm ]
Post subject:  Re: custom 6.5 PRC

I got several hundred once fired brass with my havak. I’ve found 3 boxes of new factory brass at stores locally.


Sent from my iPhone using Tapatalk

Author:  Thebear_78 [ Sun Mar 21, 2021 10:04 pm ]
Post subject:  Re: custom 6.5 PRC

Took it out to the range this weekend. This rifle will shoot! Saturday I did a OCW method of development loading 3 each 54-58.5 gr of h1000 in half gr increments with 140 Berger hybrid target.

Only problem was that they all pretty much hit the same point of impact. I bet all 27 would have gone into a 1.25” group at 100 yards. I did find a velocity node at 57gr. For 2968fps.

I loaded up a few at 57gr today abd swung by the range before work. Got it zeroed at 100 and shot this group.
Image
Decent but nothing to write home about. Checked my ballistic app and saw I should have 2.6 moa drop. I dialed it up 2.5 moa and fired this 5 shot group.
Image

Now that’s getting better. It shows some real potential.


Sent from my iPhone using Tapatalk

Author:  FOTIS [ Mon Mar 22, 2021 6:03 am ]
Post subject:  Re: custom 6.5 PRC

Great looking stick for sure!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/