LR.- 6.5mm /creedmoor from scratch.

Here we go again.- Got a Revelation/\..... what...... a Revelation 2500h whats that...... a very nice Savage 110 action..
Got a 1.250 Krieger blank, always go with factory contour....I wanted to make the contour of this blank to my specs.
started the journey..... machined the frontal part to 1.150 and dropped to 1in. straight made a cone and went to 1.250 again, for me looks good.
Its going to be a long range rig for shooting the precision series, in July will have the first tornament here at our local club.

well, the total lenght finished at 25inches, crowned at 11degrees, and made a lil box for protection.

Stock bought one of the new Boyds at one stocks, will glass bed and give support to the big barrel and action.

Think will shoot straight.

Maybe will not paint will leave it like this, will be a PRACTICAL rifle.
Will show when finished.

It certainly has potential. Should be lovely to see. For sure we will want to know how it performs in the shoot.

Very nice, can't wait to see the finished product.

The finish product.- Seems finished good :roll:
Will see how it shoots./ 6.5mm creedmoor.

Assuredly looking handsome, CZ. To be certain, we will want to see how she shoots.

I like the contrast in the wood and the sharp angles. Has kind of an Anschutz look to it.

Look into the Hornady ELD-M bullets. They've really been shining for me in 5.56 Nato loads.

Initial tests NO BREAK IN, I dont believe so in premium barrels...... 6.5mm creed, Hyvrid 100v, br2 primer and hornady match 140gr bullet.
will try RL17 tomorrow lets see how it does but Hyvrid 100V has shown always great potential.

CZ":wjgh5uhp said:

Initial tests NO BREAK IN, I dont believe so in premium barrels...... 6.5mm creed, Hyvrid 100v, br2 primer and hornady match 140gr bullet.
will try RL17 tomorrow lets see how it does but Hyvrid 100V has shown always great potential.

Click to expand...

I'll say! Fine load work, CZ, and some fine riflery.

DrMike":tzitlnde said:

CZ":tzitlnde said:

Initial tests NO BREAK IN, I dont believe so in premium barrels...... 6.5mm creed, Hyvrid 100v, br2 primer and hornady match 140gr bullet.
will try RL17 tomorrow lets see how it does but Hyvrid 100V has shown always great potential.

Click to expand...

I'll say! Fine load work, CZ, and some fine riflery.

Click to expand...

Thanks Dr. Mike for sure if I lived stateside or maybe Canada I would have a fine Custom Shop.
Would produce very accurate rifles I have learned something in 40plus years of dealing with all sort of rifles. Will show results soon. Thanks again.