Latest activity

  • xphunter
    xphunter reacted to TackDriver284's post in the thread Die to press alignment with Like Like.
    Mandrel will be the next step and I'll check run out again, first I'll check the concentricity of the case neck thickness.
  • truck driver
    truck driver replied to the thread Fat Tuesday.
    The wife says Thanks Jim. When they are hot, they almost taste like Krispy Creams. Probably if they had all the preservatives in them...
  • T
    TexasLife reacted to TackDriver284's post in the thread Talk to me about VihtaVuori with Like Like.
    I recall using N165 for my 7 Mag a long time ago, it was the only VV powder I used. I have read that VV has gained popularity these...
  • T
    TackDriver284 replied to the thread Die to press alignment.
    Mandrel will be the next step and I'll check run out again, first I'll check the concentricity of the case neck thickness.
  • T
    TexasLife reacted to TackDriver284's post in the thread Talk to me about VihtaVuori with Like Like.
    Keep us posted on your results with the 550 in the .308, I'm curious. 550 is an high energy powder.
  • T
    TackDriver284 reacted to xphunter's post in the thread Die to press alignment with Like Like.
    You may want to experiment with a mandrel to expand. Use a Wilson type seat die with a arbor press. Main thing is what it is doing on...
  • T
    TackDriver284 replied to the thread Die to press alignment.
    Yes, barely can hear it, I backed off the bushing by a quarter turn and the bushing numbers are facing down. The fired case measures...
  • JD338
    JD338 reacted to KevinNC's post in the thread Starline started making .35 Whelen with Like Like.
    Fortunately there is a good supply of different manufacturers 35 Whelen brass available, even Norma makes it.
  • JD338
    JD338 replied to the thread Fat Tuesday.
    Those look good Roger! JD338
  • JD338
    JD338 reacted to truck driver's post in the thread Fat Tuesday with Like Like.
    The Wife was busy last night and this morning making doughnuts using her secret mashed potato receipt. Five dozen total. The mashed...
  • JD338
    JD338 replied to the thread Ford Trucks..
    Same here in MI. Salt, brines, sand are most common but it depends on the temperature. Below 17°f salt doesn't work. Needless to say...
    • IMG_2036592485.jpg
  • C
    Chuck R reacted to phil's post in the thread Die to press alignment with Like Like.
    That’s one thing I like about 21st century Mandrels/Dies. They can self align.
  • JD338
    JD338 reacted to jimbires's post in the thread Ford Trucks. with Like Like.
    I'm not sure about you other guys , I live in a bad rust area . heavy use of road salt just kills the local vehicles . trying to keep...
  • truck driver
    truck driver posted the thread Fat Tuesday in Food and Recipes.
    The Wife was busy last night and this morning making doughnuts using her secret mashed potato receipt. Five dozen total. The mashed...
    • image2 (3)doughnuts.jpeg
    • image1 (1)doughnut fryer.jpeg
    • image0 (3)doughnut.jpeg
  • J
    jimbires replied to the thread Ford Trucks..
    PA is using a liquid salt brine , to pretreat the roads before a snow hits . then they use the typical salt / antiskid during the...
Back
Top