Lead Sled Question

[Vince]

I probably put this in the wrong place but I have two rifles I need to zero and being that they are harder kickers than my .338 Win Mag I was wondering how my weight to put in my lead sled?

One is a .416 Remington Magnum and the other is a .375 Ruger. Neither has a muzzle brake.

Vince

 

[JD338]

I’ve never used a lead sled but I would imagine putting a 25 lb of lead shot would dampen recoil to a tolerable level

JD338

 

[Bruce Mc]

If you don't have a bag of lead shot a couple of 10lb barbels will suffice.

 

[jjs405]

I have a lead sled and with a .416 Rigby and .30 Nolser I used 2-25lb bags for a total of 50 lbs.

 

[SJB358]

In use a PAST recoil shield on my shoulder and shoot standing up with boomers.

 

[Charlie-NY]

Guns recoil differently, and often print differently, when using a weighted lead sled rather than shouldering a rifle without one. I'd confirm POI without the sled once you are done testing ammo. Good luck.

 

[PJGunner]

I've heard that a lead sled with too much weight in the pan and a really heard kicking rifle can cause the stock to break due to the sled not giving a little. I've never used a lead sled even when shooting the .404 Jeffery or the .416 Rigby in Ruger #1 rifles. In my opinion, both rifles could stand a bit more weight.
When I was shooting them, I'd use a magnum size Past recoil pad and use a couple of cinder blocks on the bench to raise the level so that I'm shooting from a standing position. I had both sighted in for 100 yards using the open sights but always practiced off hand at 25 yards as if it were a charging buffalo or some other nasty critter. My Ruger #1 in .375 H&H I just shot off the bench like any other ordinary rifle. The .375 Taylor (.375/338 win. mag.) gives the exact same ballistics as the .375 H&H but the rifle based on a Ruger M77 tanger in a Ramline stock is pretty uncomfortable to shoot from the bench or standing offhand due to the light weight of the rifle. Needless to say, I don't shoot them anymore due to old age, my old age.
PJ

 

[Teknys]

I stopped putting much weight on to my sled. I was worried about stressing the stock. I have no proof other then by design a shoulder moves with the recoil and if I stopped the movement, then those forces are pretty harsh on the stock.

 

[Heavy Barrel]

Caldwell offers bags that are designed to fit the lead sleds that you can fill with whatever you choose, such as sand or lead shot, depending on the model you're using they also have bags that can hold water.

 

[jimbires]

I've read about the stocks breaking at the wrist . I've also read about the zero being off when switching to offhand shooting

 

[JD338]

I've read about the stocks breaking at the wrist . I've also read about the zero being off when switching to offhand shooting

I have read the same.

JD338

 

[Vince]

Thanks guys.
My concern is if I use too much weight that I’ll break the stock. After I get the .416 zeroed on the sled I’ll shoot off sticks and standing up to zero the rifle.
I’m just trying to make it as easy as I can on myself trying to get these two rifles zeroed with the new scopes. Well, one scope and a RDO.

Vince

 

[Wis65x55]

I have read the same.

JD338

I have seen this happen!