7m Rem Mag Load help needed

[Netloss]

I plan on running 160 NBT's and H4831sc in my 7mm Rem Mag. Unfortunately my Nosler manual does not have Hodgon listed and the load of 60 gr listed on the powder bottle seems quite low.

Where can I look to find a safe load that will hopefully get me close to 3000fps ?

Thanks

 

[sako2]

With the 168gn they start at 61gns. you should be good starting at 61.5gns.

 

[Blkram]

QuickLoad suggests that you should be safe (64,000 psi in a modern action) with up to 66.5 gr of H4831SC with a 160 gr AccuBond (so safe for the Ballistic Tip) in a 24" barrel for 3014 fps (3072 fps in a 26" barrel).
If you have an older action, than up to 65.5 gr for 61,000 psi as per SAAMI specs, and 2968 fps in a 24" barrel and 3027 fps in a 26" barrel.
Make sure to work up to max in your rifle, watching for pressure signs.

 

[Netloss]

That's exactly what I needed.

Thank you very much!

 

[JD338]

Sierra has load data

JD338

 

[Netloss]

ok, so here's what I wound up with. I loaded 5 each of 65gr and 65.5 gr of H4831sc with a coal of 3.31"
The groups were not impressive and both averaged around 1.5" but I know it wasn't my best day.
I can try running 66gr and a little closer to the lands but I'm not sure if I should make both moves together or separate.

 

[JD338]

If it were me, I'd try 3 shots with 66.0 grs at 3.310" and 3 shots at 3.325". (Make sure this length fits the magazine and cycles).
I'd also try 3 shots with 66.5 grs at 3.310" and 3.325".
That should tell you what your rifle likes.

JD338

 

[Netloss]

Thanks , I will give those a try.