Search results

http://www.predatormastersforums.com/fo ... w=1#UNREAD Found this one over on Predator Masters

I like your thought process. One(of many) I've thought about for 20 yrs. or more is why do they make rifles with 4 round magazines. Seems like a 2 round mag. would be plenty and rifles would be much thiner maybe even kinda racey lookin.

STW, have you done any more shooting with the PR LR primer adaptor? How is it working out for you?

Black Horn 209 is a great powder,no cleaning between shots and a std. 209 primer(not the ML type) is all thats req'd.

I agree w/you RL 19 is slow for this, but I want to shoot a few over the screen to see how it dose. I do have some Varget which I will try as well.

I cannot find any data for a 75 gr. load. I want to use Reloader 19 w/a V Max. I'm thinking around 47gr as a max. and starting at 43 and go up from there. I would appreciate thoughts from anyone here who may have used this bullet in the Roberts.

Retumbo is another excellent powder for the 25-06. No problem getting high load densitys w/this powder.

Handloader #254 has an article by John Barsness about TAC and the 358 Win. and 338 Fed. His 358 was a Ruger Hawkeye. His max load for a 200gr was 52.0gr w/Fed. 215, 2750fps. His max load for a Nosler 250gr. Partition was 48.0 gr.,2423fps. It was after reading this I began using TAC. I load for a...

Its good to be here, certainly appears to be a lot of knowledge here. That 760 has killed some nice deer both as a 35 and the present 358. I have two 7600's as well,one a 257 Roberts and the other a 25 06. These are from limited runs done for a distributer in PA. TAC is doing real well for me in...

My 358 is a Rem. 760 that I rechambered from 35 Rem. back in 91 or 92. It shoots the Hornady pretty good. I consistantly get 1 1/8 to 1 3/8 inches only using 4x. I have a leupold 1-4 on it.

I think I will try this bullet in my 358. I've used the 200gr Hornady Interlock for a long time and its a deer killer but this new 200 AB really got my attention. I use TAC (50.5gr) and getting right at 2600fps.

Having a hard time finding a "nylon" 358 bore brush. Has anyone tried a 375 brush in a 35 maybe tooo tight? I have a 50cal. Montana extream brush and I like it a lot as its very stiff. This Co. dose not make even a 375. I could get a 9mm/357 pistol if I have to. This is all related to my "blue...

Thank you al for your replies, I will get a set of good nylon brushes. Are Butches brushes nice and stiff?

Hi All, new to the site from Maine. I thought I had a copper fouling issue with a couple of rifles. Yesterday after returning from the range and cleaning and cleaning and clea....I thought hold on here this just can't be. Everytime I put the bore brush thru the barrel then patched it, it came...