Search results

In about 3 weeks I'll have a 25x284 with a fast twist barrel returning from my smith. Been a long wait this time around. Built on a Win 70 SA with a mag length of 3.1". Used a 7.5"twist lilja barrel. Can't wait to wring it out with the blackjacks and Bergers I have. Hoping Nosler comes out with...

Good Morning, Picked up a 6.5 Creed in a Kimber 84 a while back. I've always shot 129-147gr bullets in my other guns with great results. Built a couple good loads for the gun already but recoil is a little stiff because the gun is pretty light. I'm looking for a hunting bullet/load for my...

Try RL17, RL16, Ramshot Hunter, H414, W760, HLVR, Viht N550, CFE 223, Ramshot Big game, IMR4895

Found this the week before Christmas. It's a 338-06 built on pre '64 Win 70, 23" featherweight barrel in a custom stock. It's been hunted but it's in very good shape. The bore is about as pristine as it can get. Found it on GB for 750$. Merry Christmas to me! I'll try 200grABs and 210 Partitions...

RL 33 and Nosler 175gr ABLRs and Berger 195s

Pretty rifles can shoot too! Love it!

Try the 220gr Sierra and RL17. I got 2850fps with 66 grains out of a 24" barrel on my Kimber. It shoots 1/2" groups consistantly. The better BC will make up for moving a little slower. It's a Hammer! Scott

I have lost count of how many cases I have primed with mine. I have one set up for small and one for large. The only cases I don't do are pistol; Those I do on the progressive. The Hornady hand primer is one of my favorites!

Haven't decided on final chambering but I have a fast twist(7.5) .257 Brux barrel and a bunch of 131gr Blackjack bullets. I'm considering several cartridges that I have parent brass and dies for already. 257 Roberts AI, .25 x 284 or a 25 Pronghorn(WSM). Most likely built on a win 70. The Rob Ai...

When I use a bipod or tripod I either lean/load into the bipod or I support the rear of the rifle as well. I made a 524yd shot on my elk this year from a sitting position using a high bipod and my internal framed backpack in my armpit/under my rifle's butt. It was a rock solid setup.

I've always been amazed at what a good aperture sight can do with a decent sight radius. I've got a Colt AR15 with a 10.5" barrel that shoots 2" groups at 100yds and my A3O3 will do 1.5" when my eyes are up to it.

105-115gr 6mm ABLR 120-135gr .257 ABLR (I'm building a 257x284 with a 7twist barrel)

Took the O3A3 out to the range the other day. I was mainly there to sight in the rat rifles and test a new load in my 17x223. The 1903 shoots really well. I put together a mid level load of 54gr of H414 under a 150gr Hornady Interlock. I shot a group from the bench and a couple off hand. Good to...

BLR 81(all steel) in 308 or 358 is your ticket. Had one for years. It handled like a shotgun - smooth and fast. I had a 1x5 scope on it. Slayed a lot of blacktails on the run and in thick cover. It carries almost as well as a '94.

Hunted little blacktails with a 338wm for a few years. Kept it off the big bones it cored them nicely, DRT.

Thanks guys! Went digging under my loading bench and found about 400 150gr Hornady Interlocks that I received when I bought my Hornady progressive. Think I'll start with those and work into others as I go along. Best to use what I have on hand I think. Scott

I've always wanted a collection of WWII arms beside my Grandfather's 1911. Well I pulled a trigger on a Springfield 1903A3 today. What bullets you think it'll like?

(y)

Kwik Kamp in Milton - Freewater has you covered.

None. shot all mine up just before all my firearms were lost in a boating accident. :wink: