160 grain AB or 175 Grain Partition
- Thread starter 2013cossj
- Start date
DrMike
Ballistician
- Nov 8, 2006
- 37,709
- 7,193
Either bullet will accomplish your goal. I have used both from a 7mm RM to take elk, moose, and lesser game. Your 38 Nosler will serve as a serious platform for the launch of either bullet.
Blkram
Handloader
- Nov 25, 2013
- 2,982
- 3,227
While I have not used the 175 gr 7mm bullet on any game to date, I hope to remedy that this fall with the 7MM PRC with either the 175 gr ED-X or 170 gr Terminal Ascent bullet; whichever proves to be the more accurate in my rifle.
I am hoping it will be the 170 gr TA, as it is a bonded bullet for better controlled expansion, which I prefer for elk (having taken 20+ of these animals over the past 28 years).
Typically, I limit my shots in unwounded game to 400 yards. As a hunter first, I find that I can quite often get closer, for a better shot opportunity that enhances my chances of making a better shot from a field position. (I do practice to 500 yards - limit of my local range. This allows me to practice shooting form, and build confidence in my abilities with my chosen firearms, and to verify the hold over marks of my B&C or TDS reticles, for that ammo or handload, in that rifle, should I need to make a follow up shot on wounded game.)
To date, I have used the 160 gr AccuBond with great success out of my 7MM STW on a number of elk and other large game, for over 20 years, and it is shooting at 3222 fps from my rifle's 24" barrel. Shots on those animals have been from 35 to 354 yards. (I have also used the 160 gr SGK on large game from 30 to 475 yards, including a 7x7 elk at that 475 yard mark.)
(I seriously under estimated the range as 400 yards on that shot, but did hit him with the first shot, cutting a groove across the brisket right behind the front legs. When I realized he was further than I had thought, (was because I had watched him approach through my scope set at 10 power, as he entered the field almost half a mile away, and approach to where I took the shot), I adjusted and made a good double lung hit with the second shot.)
Either bullet will work well on elk for you with your Nosler 28, within your shooting distances.
Try both, and use the one that shoots most accurately in your rifle.
I am hoping it will be the 170 gr TA, as it is a bonded bullet for better controlled expansion, which I prefer for elk (having taken 20+ of these animals over the past 28 years).
Typically, I limit my shots in unwounded game to 400 yards. As a hunter first, I find that I can quite often get closer, for a better shot opportunity that enhances my chances of making a better shot from a field position. (I do practice to 500 yards - limit of my local range. This allows me to practice shooting form, and build confidence in my abilities with my chosen firearms, and to verify the hold over marks of my B&C or TDS reticles, for that ammo or handload, in that rifle, should I need to make a follow up shot on wounded game.)
To date, I have used the 160 gr AccuBond with great success out of my 7MM STW on a number of elk and other large game, for over 20 years, and it is shooting at 3222 fps from my rifle's 24" barrel. Shots on those animals have been from 35 to 354 yards. (I have also used the 160 gr SGK on large game from 30 to 475 yards, including a 7x7 elk at that 475 yard mark.)
(I seriously under estimated the range as 400 yards on that shot, but did hit him with the first shot, cutting a groove across the brisket right behind the front legs. When I realized he was further than I had thought, (was because I had watched him approach through my scope set at 10 power, as he entered the field almost half a mile away, and approach to where I took the shot), I adjusted and made a good double lung hit with the second shot.)
Either bullet will work well on elk for you with your Nosler 28, within your shooting distances.
Try both, and use the one that shoots most accurately in your rifle.
Last edited:
- Nov 4, 2004
- 25,975
- 10,942
Pick the one that shoots the best in your rifle.
Both will get the job done for you.
JD338
Both will get the job done for you.
JD338
xphunter
Handloader
- Sep 15, 2005
- 1,350
- 2,652
This was exactly what I was going to say...
