25-06 load help
- Thread starter ofdscooby
- Start date
6mm Remington
Ammo Smith
- Feb 27, 2006
- 5,276
- 708
In using a 120 gr. Nosler Partition with IMR4350. My load is 49.0 grs. It shoots great in my wife's rifle and this is the max load in the Nosler book, but no pressure signs are present.
I'd sure try that 110 gr. AccuBond again with some handloads. I think it will be terrific in the 25-06 and in fact I'm going to work a load up for it and see what I can do. I have some IMR4350 and H4831SC that I want to try first and then I'll go from there. Hope this helps.
I'd sure try that 110 gr. AccuBond again with some handloads. I think it will be terrific in the 25-06 and in fact I'm going to work a load up for it and see what I can do. I have some IMR4350 and H4831SC that I want to try first and then I'll go from there. Hope this helps.
- Oct 30, 2004
- 24,420
- 3,419
Around 50 gr of 4350
52 IMR 4831 and the same for rl 19.
Work up
52 IMR 4831 and the same for rl 19.
Work up
- Thread starter
- #4
- Oct 30, 2004
- 24,420
- 3,419
