Welcome to the forum. I imagine you will find what you are looking for. QuickLOAD will generate the data, and a number of the members run this program. It would be helpful if you specified what bullet(s) you wish to load.
I`d drop a e-mail or call Hornady and see what they offer. They developed the cartridge and are the only company I`m aware of loading it or offering brass. They use to be real good about giving data for their new offerings when asked.
Cartridge : .30 T/C
Bullet : .308, 150, Nosler AccuBond 56719
Cartridge O.A.L. L6: 2.670 inch or 67.82 mm
Barrel Length : 28.0 inch or 711.2 mm
Predicted Data for Indicated Charges of the Following Powders.
Matching Maximum Pressure: 59032 psi, or 407 MPa
or a maximum loading ratio or filling of 110 %
These calculations refer to your specified settings in QuickLOAD 'Cartridge Dimensions' window.
C A U T I O N : any load listed can result in a powder charge that falls below minimum suggested
loads or exceeds maximum suggested loads as presented in current handloading manuals. Understand
that all of the listed powders can be unsuitable for the given combination of cartridge, bullet
and gun. Actual load order can vary, depending upon lot-to-lot powder and component variations.
USE ONLY FOR COMPARISON !