338-250AB @ SPS

[nvbroncrider]

Get them now boys.

 

[Richracer1]

I saw them, had to check my inventory for many bags I currently have....y'all are safe, I have more than plenty to last me a long while.

 

[SJB358]

They didn't last too long...

 

[JD338]

The 338 250 gr AB is a great bullet and what I am using in my 338 RUM. It poleaxed a crop damage doe a couple weeks back at 350 yds.

JD338

 

[tim629]

i'm a day late seeing the post

have more than enough 338 bullets for now but no 338 noslers...

 

[russ808]

Tim, It didn't matter. I checked that day and they were already gone.
Russ

 

[tim629]

figure not worth a whole new thread for this question:

338-06AI should be here within a few weeks (fingers crossed)

I have seen through previous posts on the forum that some of you have a 338-06/338-06AI or at least have experience with them.

Will the 338-06 A-Square brass work and fireform to the 338-06AI? I'm understanding the A-square was a matter of who took it to SAAMI for "factory specs", but are the 338-06's being built by custom guys running the same dimensions?

Just looking on sps seeing the 338-06 A-square brass, bit pricey but figure if I travel at some point down the road could be nice to have something with a 338-06 head stamp. so just buy a box and sit it on the shelf for now

 

[SJB358]

Yup, it should be fine Tim! That'll be super brass!

 

[DrMike]

Wise move on your part, Tim. Anticipate the need before you are there. Consequently, brass will not get any cheaper in the immediate future.

 

[russ808]

Tim, One thing I notice about Nosler brass. Its good, it goes fast, and it doesn't come up very often. I buy when it comes up. It doesn't rot and a friend might really need some.
Russ

 

[JD338]

Tim,

The Nosler brass is good stuff. I agree with you on having proper head stamped brass.
It should fire form nicely in your AI chamber.

Like Russ mentioned, pick up a couple boxes and you will be set for many years.

JD338

 

[nvbroncrider]

figure not worth a whole new thread for this question:

338-06AI should be here within a few weeks (fingers crossed)

I have seen through previous posts on the forum that some of you have a 338-06/338-06AI or at least have experience with them.

Will the 338-06 A-Square brass work and fireform to the 338-06AI? I'm understanding the A-square was a matter of who took it to SAAMI for "factory specs", but are the 338-06's being built by custom guys running the same dimensions?

Just looking on sps seeing the 338-06 A-square brass, bit pricey but figure if I travel at some point down the road could be nice to have something with a 338-06 head stamp. so just buy a box and sit it on the shelf for now

Tim,

I have one and it's a sweetheart you will love it. I used 06 brass but got some 338 brass I plan on using too. I'm running 225AB at 2800. It's a pleasure to shoot. If you have questions once you get it PM me.

Jake

 

[tim629]

not the 250AB's but they currently have the 200's in stock

just ordered 2 for myself thinking they will do just fine on a black bear or a deer this fall (if the gun is ready)

 

[JD338]

not the 250AB's but they currently have the 200's in stock

just ordered 2 for myself thinking they will do just fine on a black bear or a deer this fall (if the gun is ready)

Tim,

The 200 gr AB is a pretty robust bullet and it will work very nicely at your 338-06 velocities.
I shot them at 3200 fps from my 338 RUM and they held up well and shot very accurately.

JD338

 

[SJB358]

Those 200's shoot real well outta my 338.