35 Whelen - 200 interlock 2650fps

[FOTIS]

I will be using these in my 358 BLR to start with.

 

[truck driver]

You certainly have a number of good powders and will find a good load quickly I bet.

gerry, what is your OAL for the TTSX200gr ?

 

[gerry]

My records show I started at 3.335" but accuracy improved as I went deeper to 3.305"

In the Norma things were great just off the lands so I just kept it there.

 

[truck driver]

My records show I started at 3.335" but accuracy improved as I went deeper to 3.305"

In the Norma things were great just off the lands so I just kept it there.

Thanks for the info gerry. I'm going to try and pick so up to play with. I also found some Norma 35 Whelen brass which is cheaper than Nosler.

 

[gerry]

The Norma brass is top notch stuff, in fact I just ordered a bit more for my Whelen last night. Both the 35 Whelen and 358 Norma brass has been excellent with run out of less than .001" which is very good. It is nice when you can count on your loads being seated straight, makes work up much easier. I have to say the Lapua 260 Rem brass I have is very disappointing (very soft and terrible run out, .008" - .010"+) and will be replaced one day by some Norma brass......

 

[truck driver]

Thanks for the info gerry I'm looking at the Norma brass but want to build an order to balance the cost of shipping.