Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
257 Ackley":uiu02eg6 said:Greg - what is the twist in the barrel? Mine is coming with a 8.5 twist since I want it exclusively for 130 and 140 grain bullets. I have been waiting for 2 months for Brux to get the barrel to my gunsmith, and it finally arrived this week! This is going to be screwed on a blue printed Winchester action. It will be going back into the featherweight stock (pillar bedded now) that came with the rifle.
I used .270WSM brass (Winchester) and resized it in one pass using One-Shot lube. No big deal using a standard full length Redding die. We will have to be like a couple old ladies and swap recipes :roll: .
ls1cwby":2zpaowfz said:I have really only worked with the 130gr Scirroco and Retumbo in my 6.5/300WSM(should be called 264WSM). 65.2gr is giving me and avg. of 3240fps, best group .43" worst group .79" of 3 groups. This is my load until I get more time to play with other bullets. Mine is a Rem 700, 26" Shilen with 1 in 8 twist. My throat is short, I have a fair amount of room in the magazine.
glane5910":1qxclzf6 said:Thanks to all of you. There are a lot of loads there Dr Mike, big thanks. I've been using Ramshot powders(X-terminator and TAC) lately in my 6.5 Grendels, 6x45 and 223(all AR-15 platforms) and 308(M1A) with very good results. I'll get some Magnum to try and Retumbo also. I've got an AR in 243 WSSM that really likes RL17.
My 280 Rem really likes the RL22 also so that's going to be a starter for my 280 AI.
Greg