7mm Rem Mag Load Data?

[BigBlue]

I just ordered the AccuBond 160 gr bullets for my new 7mm Rem Mag, could anyone help with some load data?
Don

 

[Guest]

You can use 160 grain Partition data.

 

[Eagleye]

Excellent choice is Reloder 22. Start at 62 grains and work up CAREFULLY. Max will probably go 66 or 67 grains. Eagleye.

 

[longwinters]

I have had good success with Nosler Accubonds using IMR 7828 (63gn) and Reloader 22 (61gn). CCI mag primers and Winchester cases. These loads give me 1/2 - 3/4" at 100yds. Of course all loads should be worked up safely.

Long

 

[BigBlue]

Thanks guys. My dies are on their way from Cabellas. Now I need to find a place that carries Nosler's brass. I have Re22 on my powder list, I'll pick it up from T+T tomorrow.
Don

 

[slats]

get remington nickle plated brass from midwayusa.com needs less polishing and is consitent now if only i could get 340 wby brass in nickle

 

[todbartell]

RL25 or H1000 would be a decent choice as well, fills up the case a bit more. around 70 grains is max, work up slowly from below this charge...

 

[turko77]

I agree with longwinters on the 7828,use it both in the 280 and 7mm rem mag.