7mm WSM 140gr. Accubond Loads

[TN deer hunter]

Does anyone have any good loads developed with the 140 Accubonds for the 7mm WSM? Also has anyone shot the Winchester or Federal factory loads and how do they shoot?

 

[Anonymous]

Try calling our customer service 1 (800) 285-3701. Mike might have some info for you. Also try shortmags.org and Hodgdon's website. They don't have the 140 AccuBond for your 7mm WSM but you can cross reference and get some ideas. Hope that helps.

http://shortmags.org/shortmags/ref_data/Nosler_7WSM.htm

http://www.hodgdon.com/data/rifle/7mmwinshortmag.php

 

[Savage99]

I use the same load and seating depth as with BT's and with RL 22, 215 primers and WW brass this rifle is very accurate.

I would work up from about 62 grs.

 

[Tiny]

Nosler2 Good advice.

RL19 is showing good results in mine with both the 140grAccubond and Partition settled on 69grs for the 140gr AccuBond.