G
Guest
Guest
I have a load worked up for the 200 grain AccuBond out of my .300 Win Mag, but I like to tinker so I am going to play with the 180 grain version to see if my groups tighten up a bit. If not, oh well.
My question is:
Are the nose profiles the same on both weights, with the difference in the two bullets being in the shank. I am wondering whether I need to go through the excercise of finding the depth to lands again, or whether the seating depth for the 200's should be the same seating depth as the 180's.
I hope this made sense...I know what I am thinking, but not sure it came out that way on cyberpaper :shock:
My question is:
Are the nose profiles the same on both weights, with the difference in the two bullets being in the shank. I am wondering whether I need to go through the excercise of finding the depth to lands again, or whether the seating depth for the 200's should be the same seating depth as the 180's.
I hope this made sense...I know what I am thinking, but not sure it came out that way on cyberpaper :shock:
