Another QL request (due to my error)

[Bbear]

Ok, I picked up a 1 pound of IMR4451 to try in my 25-06 without writing down what I needed. I was wanting something new to try with some 110 AB's. Checking Hodgden, they don't show the 110's, just 100's and 117's.
Could someone run QL with IMR 4451, Hornady brass, WLR and Nosler 110 AB's in a 22" barrel and let me see if it would work worth a flip? Or, do I just need to suck it up and try it in some other rifle?
Thanks in advance.

 

[DrMike]

Unfortunately, IMR 4451 isn't in the update for QL at this time.

 

[Bbear]

Just my luck. Oh well, it will work in my 30-06 so I'll give it a shot. Thanks Dr. Mike!

 

[MAinAR]

Just updated burn rate chart from Hodgdon indicates that you can use starting loads of the 4350's and work up load from there. Updated Yesterday.

http://www.imrpowder.com/PDF/Burn%20Rat ... 5-2016.pdf

http://bulletin.accurateshooter.com/201 ... ate-chart/

And it was designed as a direct replacement/alternative to H4350. See testing here at 50grains of each in 30-06 and velocity correlations..

http://bulletin.accurateshooter.com/201 ... -imr-4451/

 

[Bbear]

Thanks! That helps a bunch. I'll post results of the 4451 and the 7977 when I can.