Best 410 powder for 11/16oz loads?

[tjen]

So far I hear H110/296 is it. Anyone use 4100 or 2400? I heard the early Lilgun was hot and thus hard on hulls, anyone using it today? If so which primer too? I plan on using rem hulls mainly.


I see a 410 MEC Sizemaster in my near future. I have one in 28ga and love it. I use 20/28 for 3/4oz 1200fps loads.

We will see if there are any shotgunner here on Nosler.

 

[Wincheringen]

300MP is a really good 410 powder. All the skeet guys are using it now with great hull life and it is cheaper than all the others.

 

[tjen]

I have found that Alliant is making a new flaked powder called "410". Their 20/28 powder works great in my 28ga 3/4oz at 1200fps, so I will give this new powder a try. 11/32oz at 1200fps and clean burning.

 

[onesonek]

I'm using 2400 with Chedite primer. It patterns nicely in my 12" Encore.

 

[tjen]

I have neaver seen a chedite primer only 209"s by rem/win/cci/fed/wolf/fiottci I my have left out a few. I thought chedite was a type of hull that many ammo makers have used.

I have heard the term "chedite primer" used only twice so far. So Chedite is a manufacturer of primers?

 

[Wincheringen]

Yes, Cheddite (pronounced Che day) is a large European manufacturer of primers, hulls, and ammunition.

http://www.cheddite.com/indexENG.HTM

They are decent primers at a good price, and usually available.

 

[onesonek]

I heard about them from a trap shooting buddy. I used them for trap for the 5 years I shot. Seemed very consistant, and not one failure.

 

[tjen]

Went to BPI web site today and saw all the Cedite products. Ya learn somthing thing every day. Thanks for the reply sounds like a french company.