snoodcrusher
Beginner
- May 8, 2015
- 95
- 0
Here's my Savage 220 F 20 ga. slug gun/ rifle. This gun evolved into what you see in the picture. It came with a plastic black stock that was horrible. It was so weak and flexible that I couldn't even epoxy/ bed the recoil lug without it blowing out after a few shots. The best groups that I could achieve were 3-4" at 100 yds. I had however narrowed my slugs of choice to Remington 3" Accu tips and Federal Premium 3" sabots. The gun was topped with Leupold 3x9 x40 shotgun/ ML scope with the ballistic plex reticle. DNZ one piece rings/bases were used to mount the optic to the receiver.
I was ready to give up on the rig until I decided to order a laminate stock from Boyd's Stocks. I chose the grey pepper in the Prairie Hunter style. It required minimal inletting, mainly around the rear tang area, the well know culprit with Savage rifles. I glass bedded the recoil lug and torqued the action screws to 45in/lbs. I was now ready to test the work I'd done.
It took a few rounds to get on target. I let the barrel cool and fired a 5 shot group with the Federal sabots. The group wasn't bad but I wanted better. I cleaned the barrel and then tried the Remington Accutips at the top of the target. The group was a perfect clover leaf pattern that actually made just one hole. I was ecstatic! I was sure glad that I didn't give up on the slug rifle project! The Boyd's laminate stock that I was able to bed properly made all the difference. It helped with accuracy and looks which are priorities #1 and #2 for any of my weapons.
The Savage proved itself on this buck last season. Not a giant but the first buck that I had killed with a firearm since my heart attack that about killed me 10 months before. I am thankful for another chance at life and the opportunity to hunt and enjoy shooting of all types.
God bless.
Sent from my iPad using Tapatalk