C T bullets

winston

Beginner
Jan 2, 2007
52
0
I haven't been reloading very long and everything that I have loaded so far does real well except for the Combined Technology Bullets. I've tried different methods to get them to shoot and nothing has worked. Does anyone have any idea as to what could be wrong?
 
This is a good place to get information.
Descride the different methoeds you have been using and the results you have been getting.
Also what caliber, bullet weight and rifle
 
I have tried different charge weights of powder and different types of powders. The three calibers that I have are a 243 Model 700, 300 RUM Model 700 and a Model 70 7mm WSM.
 
I found the CT Ballistic Silvertip in .338 200 grain out of a .338 Federal Ruger Hawkeye M77 to require about 20 fouing shots to start grouping well. I am guessing that it may have something to do with the coating?? Are you shooting a clean bore when testing? Why can't they just make the Nosler Ballistic tip in .338?
 
winston":1wzbns9z said:
I have tried different charge weights of powder and different types of powders. The three calibers that I have are a 243 Model 700, 300 RUM Model 700 and a Model 70 7mm WSM.

What powders and charge weights by caliber have you used?
What is the COL of each load?
What level of accuracy are you getting?

JD338
 
Back
Top