Donor Rifle
- Thread starter truck driver
- Start date
- Thread starter
- #62
truck driver
Ammo Smith
- Mar 11, 2013
- 7,393
- 1,059
Thanks Scotty, not fancy but better than it was.
DrMike
Ballistician
- Nov 8, 2006
- 37,584
- 6,751
Very nice, indeed. I believe you're onto something, Rodger. 
- Thread starter
- #64
truck driver
Ammo Smith
- Mar 11, 2013
- 7,393
- 1,059
I've got to bed the action and float the barrel plus make a piece for under the trigger guard since the stock was for a one piece bottom metal and there is a gap because the floor plate doesn't fully cover the the the inleted magazine well. But that will be easy enough to do since I made a spacer for the front under the action screw. I know PTG makes a spacer but why buy something when I can make it and have material on hand to do it. Plus mine will be metal and not plastic. :mrgreen:
Oldtrader3
Ammo Smith
- Nov 6, 2009
- 8,406
- 7
You can buy a plastic spacer for the older stock for $8 which will fit the one piece bottom metal and not show.
- Thread starter
- #67
truck driver
Ammo Smith
- Mar 11, 2013
- 7,393
- 1,059
Thanks Ot3 it's a post 64 stock for one piece metal and I have the two piece metal which they also make a spacer for I think I saw it on PTG's web page.
I've got some walnut that I was going to make a spacer out of to put under the trigger guard and have made an aluminum spacer for under the front action screw. The Walnut will be flush with the bottom of the stock and blend in nicely to fill the area the mag cover doesn't cover.
I've got some walnut that I was going to make a spacer out of to put under the trigger guard and have made an aluminum spacer for under the front action screw. The Walnut will be flush with the bottom of the stock and blend in nicely to fill the area the mag cover doesn't cover.
