- Thread starter
- #101
jerbearyukon44
Beginner
- Jul 28, 2024
- 101
- 61
Ok I have success with my first Hornady bullet ![Beaming face with smiling eyes :grin: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f601.png)
![Beaming face with smiling eyes :grin: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f601.png)
![Beaming face with smiling eyes :grin: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f601.png)
![Beaming face with smiling eyes :grin: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f601.png)
![Beaming face with smiling eyes :grin: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f601.png)
![Thumbs up :thumbsup: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png)
![Thumbs up :thumbsup: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png)
![Thumbs up :thumbsup: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png)
![Thumbs up :thumbsup: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png)
![Thumbs up :thumbsup: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png)
.
I took my time and used the Hornady wax
These are my measurements before with a case out of the box.
Then sized, trimmed, seated.
39.5 grains of IMR 4350
Going to load 4 of each
39.5-40.5-41.5-42
Based on newer load data someone sent me from Nosler
Of course I will work up and see what works.
I will just do the 39.5 first to make sure it shoots before I go any further though![Flushed face :flushed: π³](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f633.png)
![Beaming face with smiling eyes :grin: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f601.png)
![Beaming face with smiling eyes :grin: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f601.png)
![Beaming face with smiling eyes :grin: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f601.png)
![Beaming face with smiling eyes :grin: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f601.png)
![Beaming face with smiling eyes :grin: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f601.png)
![Thumbs up :thumbsup: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png)
![Thumbs up :thumbsup: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png)
![Thumbs up :thumbsup: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png)
![Thumbs up :thumbsup: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png)
![Thumbs up :thumbsup: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png)
![Thumbs up :thumbsup: π](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png)
I took my time and used the Hornady wax
These are my measurements before with a case out of the box.
Then sized, trimmed, seated.
39.5 grains of IMR 4350
Going to load 4 of each
39.5-40.5-41.5-42
Based on newer load data someone sent me from Nosler
Of course I will work up and see what works.
I will just do the 39.5 first to make sure it shoots before I go any further though
![Flushed face :flushed: π³](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f633.png)