It has arrived!!

300WSM

Handloader
Dec 24, 2011
963
578
It officially has arrived...
1000005719.jpg

1000005721.jpg

1000005722.jpg

My favorite rifle to this point has always been a model 70
(pre-64 action)

It officially has arrived...
1000005719.jpg

1000005721.jpg

1000005722.jpg

My favorite rifle has always been a model 70
(pre-64 action)
I love that action!
Nothing says silky smooth like a CRF model 70 action.

Unfortunately Winchester model 70's are no longer made in USA which is a big deal to me.

I was extremely impressed with the new Weatherby when I checked it out.
I was buying it either way as I've always just wanted to have a 30 Kong...

To my surprise the first thing I noticed was the Mark V is made in USA!!! That may not be that new but I haven't looked at a Mark V in a looong time.
Then after seeing the fit and finish I got even more excited. This thing is outstanding so far.

Now I'm in a dilemma on rings and bases.
I NEVER go cheap but do I get quick release like cross slot type or the old school cam in front rear dovetail style.

That question is occupying my brain this weekend !😡!😡!🤬
 
I always either use Murphy precision 1913 pic base/pic rings(There’s several good ones) or DNZ base/rings. I love both, the DNZ are substantially lighter being made of aluminum.
 
My oh my. I will be following this. Now that Weatherby has moved to Wyoming, I’m following them closely. Congratulations on the purchase.
 
I’ve tried a lot of different combinations on Weatherby rifles, Mark V and Vanguard.
My favorite remains the Talley lightweight 1-piece mounts. I still lap them once installed just to be sure, but they work very well with a minimum of fuss and less pieces.

If you want the cost-no-object option, look at the Near Alphahunter:
Mine lives on my 7mm Wby Accumark.
 
I’ve tried a lot of different combinations on Weatherby rifles, Mark V and Vanguard.
My favorite remains the Talley lightweight 1-piece mounts. I still lap them once installed just to be sure, but they work very well with a minimum of fuss and less pieces.

If you want the cost-no-object option, look at the Near Alphahunter:
Mine lives on my 7mm Wby Accumark.
Those Alpha Hunter mounts look really nice!

JD338
 
I only have M70 CRF made in New Haven or WBY MKV rifles for hunting. I my last three MKV I have used Leupold QRW, I want to ability to take them off for travel. I also used those on my M70 375H&H so I can use iron sights in brush country
 
This
I'm trying to figure out what the MOA options mean with the bases they sell.

Is it the cutout area where the shell ejects causing less possible interference?

One thing I was doing was ignoring one piece bases because of that very reason. The 30 kong is fat and long and it's main use will be 1000 yards to 1 mile shooting. I can take my time removing the fired cartridge plus I also don't want to fight with it for removal when trying to keep it from kicking out rapid fire style.

If you understand what I mean...
 
I only have M70 CRF made in New Haven or WBY MKV rifles for hunting. I my last three MKV I have used Leupold QRW, I want to ability to take them off for travel. I also used those on my M70 375H&H so I can use iron sights in brush country
I have been looking very hard at the two piece cross slot bases and the QRW2 rings.
I've never had a complaint about Leupold rings and bases and honestly I've ever had an issue with anything USA made Leupold.
The imported cheaper stuff they have I DO NOT LIKE

Mine 70's ( I have many) are New Haven guns and I do have one of the few Extreme Weather models in 300WSM that was made by FN in North Carolina or South Carolina.
They didn't make many there...
 
I have been looking very hard at the two piece cross slot bases and the QRW2 rings.
I've never had a complaint about Leupold rings and bases and honestly I've ever had an issue with anything USA made Leupold.
The imported cheaper stuff they have I DO NOT LIKE

Mine 70's ( I have many) are New Haven guns and I do have one of the few Extreme Weather models in 300WSM that was made by FN in North Carolina or South Carolina.
They didn't make many there...
FOTIS mentioned Warne and I would give a strong second to that, but as he mentioned, get the steel, not the lightweight options. I use Warne on everything and I even have some of their QD rings and they lock down tight. Make sure you use a torque wrench on these as to not over tighten. Warne sells a T wrench for this very purpose and it is a T-15 Torx, with 25 inch lbs of break. I also use Blue Loctite specifically on the bases.
Good luck with whichever direction you go.
 
FOTIS mentioned Warne and I would give a strong second to that, but as he mentioned, get the steel, not the lightweight options. I use Warne on everything and I even have some of their QD rings and they lock down tight. Make sure you use a torque wrench on these as to not over tighten. Warne sells a T wrench for this very purpose and it is a T-15 Torx, with 25 inch lbs of break. I also use Blue Loctite specifically on the bases.
Good luck with whichever direction you go.
I have Warne and nothing against them.
Matter of fact they're in the running.

Warne
Leupold
Ken Farrell and tg42 as well
 
Back
Top