Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Nosler4":6houy4us said:I've heard about that kind of thing happening before and it's usually because people overload the sled with weight. The sled needs to be able to move a little bit--that energy has to go somewhere. We use a led sled in our lab and have never had any problems. Anybody had first-hand experience breaking a stock?
That is why I lay my hand underneath the pistol grip so when the rifle returns from the initial recoil it slams down on your hand like a hammer and raised a weld about 3/8" high. Don't ask me how I know, I and I'll only do that once, I hopedubyam":1r297chg said:No first hand experience here, but I've heard reliably second hand about an incident where a stock was broken at the pistol grip/wrist area and the cause was traced to the base of the pistol grip riding on some hard part of either the rest or the weight stack on it. I wasn't there, but that's the story I heard. I've heard of other cases of similar damage to stocks when rifles were shot with inadequate support on hard bench tops and the pistol grip contacted the bench top.
Black-tailed bandit":k2em2b2i said:That is why I lay my hand underneath the pistol grip so when the rifle returns from the initial recoil it slams down on your hand like a hammer and raised a weld about 3/8" high. Don't ask me how I know, I and I'll only do that once, I hopedubyam":k2em2b2i said:No first hand experience here, but I've heard reliably second hand about an incident where a stock was broken at the pistol grip/wrist area and the cause was traced to the base of the pistol grip riding on some hard part of either the rest or the weight stack on it. I wasn't there, but that's the story I heard. I've heard of other cases of similar damage to stocks when rifles were shot with inadequate support on hard bench tops and the pistol grip contacted the bench top.