Load Data 6.5 PRC 140 RDF, H1000

[bbean70]

Just purchased a Seekins Element 6.5 PRC and looking for some load data or QL Data for 6.5 PRC Nosler 140 RDF, H-1000, ADG Brass, GM 210M, 21" 1:8 Twist barrel. any info is greatly appreciated
Thanks in advance

 

[sako2]

6.5 PRC Load Data

Nosler, the world's finest bullets, ammunition, rifles, & brass. We manufacture Partition, AccuBond, E-Tip, Ballistic Tip, Custom Competition and much more.

www.nosler.com

 

[xphunter]

Just purchased a Seekins Element 6.5 PRC and looking for some load data or QL Data for 6.5 PRC Nosler 140 RDF, H-1000, ADG Brass, GM 210M, 21" 1:8 Twist barrel. any info is greatly appreciated
Thanks in advance

Congrats on a really nice rifle and welcome to the forum!

 

[xphunter]

With a throat that was not yet broke in with a 18" 6.5 PRC.
59.0 grains of H-1000 and a Fed 215, I was just over 2800 fps with a 140 AB

 

[bbean70]

With a throat that was not yet broke in with a 18" 6.5 PRC.
59.0 grains of H-1000 and a Fed 215, I was just over 2800 fps with a 140 AB

Thank you for the info

 

[xphunter]

Tim King Zeroed the gun.
Then he did one shot per load, jumping half grain increments each shot. Started at 57.0 grains of H-1000 and ended 61.5 grains.
10-shots with 10 different powder charges with a sub MOA group for 10-shots at 100 yards - Lilja Barrels shoot pretty good!
Even with factory ammo it shot good just past 1K - Right at 3.5" with Matt shooting it

 

[bbean70]

Tim King Zeroed the gun.
Then he did one shot per load, jumping half grain increments each shot. Started at 57.0 grains of H-1000 and ended 61.5 grains.
10-shots with 10 different powder charges with a sub MOA group for 10-shots at 100 yards - Lilja Barrels shoot pretty good!
Even with factory ammo it shot good just past 1K - Right at 3.5" with Matt shooting it

Nice. Sweet Rifle