Presses and Impressions

[Slimfinn]

I started with the Lee anniversary setup i think it was. Then a while back when i wanted to upgrade and my space was limited i watched the video from Gavin at ultimate reloader, and decided on the Lyman Brass-Smith Ideal, and have been very happy with it

 

[Blkram]

I have the RCBS Summit and need to get it set up to use. I will be getting the upgrade for the linkage a mentioned above to mitigate the slop that can appear over time.
I find it interesting that Federal's Custom Shop uses this press for all of its custom handloading and load development.

Over the years I have also wanted the Redding T-7 and the Forester, but have not gotten either as yet...but I have used DrMike's from time to time and do like its simplicity!

 

[mjcmichigan]

I currently have 5 centerfire presses and 2 shotgun presses.

RCBS RockChucker: solid reliable press, but now regulated to a e-capping station.
Redding Ultra-Mag; bought it when forming a wildcat and loading for BPCRs, it's now my mainstay for rifle reloading.
Dillon 550B: all handgun, 223 and .308 bulk
Dillon 650: 9mm and 223 for IDPA and 3Gun

Ponsness Warren 375C: 20, 16 and 12Ga
Ponsness Warren 900E: 12GA

16 is a good gauge to be loading for!
Haven’t heard of Ponsness Warren. Will keep my eyes open!

 

[mjcmichigan]

I have the RCBS Summit and need to get it set up to use. I will be getting the upgrade for the linkage a mentioned above to mitigate the slop that can appear over time.
I find it interesting that Federal's Custom Shop uses this press for all of its custom handloading and load development.

Over the years I have also wanted the Redding T-7 and the Forester, but have not gotten either as yet...but I have used DrMike's from time to time and do like its simplicity!

Gil, thanks for sharing Federal is using them!

 

[Chuck R]

16 is a good gauge to be loading for!
Haven’t heard of Ponsness Warren. Will keep my eyes open!

Here ya go!

Posness/Warren - Reloaders.com : Welcome

WE BUILD TO ORDER Lead Times on all Progressive Loaders, Auto Drives & Shell Feeds are about two years. TO ORDER THE ABOVE ITEMS please call us with your credit card information to hold until we are able to ship. 208-687-2231 or 1-800-732-0706 Ponsness/Warren strives to get your product to you...

www.reloaders.com

 

[Joe C.]

I've loaded a fairly long time but haven't used many presses. Started with a RCBS Rockchucker, then went to the cast iron LEE "O" frame press. I got the Frankfort Arsenal M Press aa few years ago and love it. It's a coaxial press and loads very consistent ammo. It looks like the Forster but with a few differences. Price being the biggest difference.