nvbroncrider
Handloader
- Aug 20, 2011
- 3,085
- 4
Did some more shooting today did some verification of some stuff I was working on. It was a cold day at 24 degrees but with no wind I figured it was worth a shot. I had some verification loads for the 22-250 and some test loads for the 338 to shoot. I started off with the 200 BT over 56 gr of 4895. It shot about 1.2" at about 2830. The other day this load was shooting around 2880 in 45-50 degree weather. I also had some test loads using CFE223 to test. Starting at 52 gr and working up to 62. I was able to shoot all of them and the 61-62 loads grouped into one inch. The 62 gr load clocked at 2917 with no signs of pressure. I believe it will let me work up to 64 gr with very slight compression. In the middle of these I shot the 22-250. By this time I was chilled and had a tough time feeling my fingers or the trigger. I had 10 loaded under 39 gr of CFE. It proved my last group was no fluke. These shot really well with the ones after the fouler and the times I didn't pull off target into a .220" group for 5. These were also a touch slower than the other day but still averaged 3754 ES 63 SD 21. With the 2 highs and two lows out it look like this 3752 ES 32 SD 12 I finished the day out with 6 225AB over 4895 which averaged 2680 ES 27 SD 10 accuracy wasn't quite what I wanted but by that time I was shaking pretty good. So it might be worth a better look.