Rem 350 Mag

[Darkhorse]

If I wanted a tighter group and lower velocity, and the "too long" bullet length was a problem. I would not hesitate to use a good 180 grain bullet and work with the seating depth and different powders to find another node that gives the desired effect. You are pretty close right now.

 

[Darkhorse]

First thing I'd do is reduce your powder (same powder) charge until you get pressure you can deal with. Then seat the bullet (same bullet) .010 deeper per group and just see how it looks then.

 

[FOTIS]

update!!!!

Great range day!

Went out yesterday and did some shooting. My primary goal was to finalize the 350 Rem mag load. see here for details. https://forum.nosler.com/threads/rem-350-mag.46038/#post-501175 Well I dropped the load a few grains and this is what I got. To say I am happy would be truly an...

forum.nosler.com

 

[JD338]

Perfecta Mondo!

JD338

 

[Greg Nolan]

I understand not being able to seat it out further but can you not seat it shorter, or is the ogive the problem there.

Fotis
I'm using the 200 gn Hammer bullets at 3050 fps. It's more of a caliber than it seems.