- Thread starter
- #21
TackDriver284
Handloader
- Feb 13, 2016
- 2,560
- 2,140
I was leaning on either the ATACR 7-35 or the Votex Razor, I never used a Vortex scope before, specs and a video below.
What do you suggest?
Retiring the 7mm Magnum
- Thread starter TackDriver284
- Start date
What do you suggest?
flyingagg
Handloader
- Dec 16, 2019
- 462
- 479
My suggestion when it comes to scopes and binos, make sure you look through them at dusk and at distance. Not everybody's eyes are the same. Just make sure the glass matches your eyes. (from Personal experience).
I have a Winchester M70 Stainless classic .338 Win. Mag. with a brake. No help, It still jolts hell out of me.'Paul B.
Tucson, AZ
Paul B.
Mark , I've kicked these two scopes around a little before, trying to decide between them . the difference in magnification is negligible . the Nightforce has 100 MOA elevation , the vortex has 120 MOA . I've read the vortex turrets are not as crisp ( clicky ) as would be preferred . the vortex only comes in front focal , the nightforce comes in both . the nightforce comes in black and brown , the vortex only brown . both have lifetime warranties . I like nightforce glass quality . I have a pair of vortex razor bino's and I think the glass is really good in them too . comparing price on front focal scopes , the nightforce cost is about $700 more . it seems like there is always an open box store display nightforce available at the $3000 price point . this is a tough decision for me . I know nightforce quality . I know vortex had some problems with their cheaper line of scopes . I don't know of anyone that has this top of the line vortex . I like the extra 20 MOA of elevation in the vortex . if the nightforce had 120 MOA or more , I probably would not consider the vortex . the color doesn't matter to me , it might if or when I tried to sell it though . it's a very hard choice for me .
I was also comparing the Valdada G2 scope , with the other two scopes . I got to play with a valdada , I don't "THINK" the glass is equal to nightforce . to be fair , I did not make any adjustments to the scope , other than the side focus .
remingtonman_25_06
Handloader
- Nov 17, 2005
- 2,807
- 402
The Vortex Razor HD line is a very good Scope. I shoot with a good friend of mine that has one on his 338 Lapua and I've shot and looked through it a couple different times. I wouldn't have any issues running it if I had to that's for sure.
It's just at that price point, I'd still rather have the NF just because you know you're never going to have an issue with it. When you start talking about $3K scopes, Vortex just isn't high on my list personally. There are several others I would rather have at that point.
It's just at that price point, I'd still rather have the NF just because you know you're never going to have an issue with it. When you start talking about $3K scopes, Vortex just isn't high on my list personally. There are several others I would rather have at that point.
RL338
Handloader
- Mar 23, 2017
- 3,369
- 5,491
I don’t think you could wrong with either one. Both are above my allowance.
xphunter
Handloader
- Sep 15, 2005
- 1,239
- 2,223
I know of several people who started shooting specialty pistols because of various health issues. Sometimes it’s because one of their eyes, a shoulder or recent open heart surgery, etc..
It may not be for you, but you don’t have to be limited in your hunting, if you just learn a slightly different skill set when hunting
I do have a Contender 14" in 30-30 but just don't use it. I took a couple of deer with a Ruger Super Blackhawk during the frst two years that it was legal in Nevada but never followed through with it. Basically my outdoor handgun usage has been protection against predators, both two and four legged varieties.
Paul B.
xphunter
Handloader
- Sep 15, 2005
- 1,239
- 2,223
I was thinking more along the lines of a rear grip or center-grip Bolt Action Specialty Pistol. Not nearly as finicky as a break-open action
I was amazed by how well a Contender in 30-30 would shoot. I was at the 1983 Black Canyon IMSA Championships when Dick Foltz shot the first 80x80 with a 10 inch production gun. He used 165 grain bullets. A month later at the Alaska championship I spotted for him. After going clean through the first 45 targets he started missing rams by a bunch. By watching very close I was able to spot the bullets losing stability at around 175 meters. After that he had to go to 150s to get them to shoot.
Sorry this has nothing to do with a7 mag.
Sorry this has nothing to do with a7 mag.
I have been using my Competitor Arms in 30.06 for a lot of years and have taken a number of Whitetails with it. I had the opportunity to use an XP100 on a number of occasions also and I actually prefer the Cannon Breech of the Competitor. I have a couple of different barrels for the competitor (super easy to change) Accuracy is definitely equal between the Competitor and the XP100. I'm just sorry the Competitor was discontinued.
xphunter
Handloader
- Sep 15, 2005
- 1,239
- 2,223
Never fired or had one of those.
I am NOT a fan of a factory XP-100.
Pretty much hate that Zytel stock.
A customized one though-Oh Yeah!
