Working up a load for 7mm Rem Mag with 140 AB. I started at 71 grains and moved up half a grain at a time until I reached Quickload predicted velocity. Not having any knowledge of this NEW powder I was careful to track how it reacted as it was put under load and track temps from 35 to 75 degrees. This gun has always been 100-150fps slow so I was wanting to see if I could get speeds up with RL26. Gun is Remington Sendero SF1 with 26" barrel.
Couple of points of interest:
*RL26 is very consistent making predicted speed ( fps per grain) no big jumps along the way.
*Appears advertising temp stability of .5fps per degree seems spot on even at the lower charge weights.
*POI was very consistent all thru the loads tested.
*Groups hung around .5 to .8 moa with all the loads tested, no big changes.
*At 2.3 grains over max load data and no pressure signs.
Just wished I hadn't pulled the 3rd shot in this group right or it would have been awesome. Magnetospeed chrono SD 11 and ES 28 Avg MV 3,310 Temp 54
100 yard target

Couple of points of interest:
*RL26 is very consistent making predicted speed ( fps per grain) no big jumps along the way.
*Appears advertising temp stability of .5fps per degree seems spot on even at the lower charge weights.
*POI was very consistent all thru the loads tested.
*Groups hung around .5 to .8 moa with all the loads tested, no big changes.
*At 2.3 grains over max load data and no pressure signs.
Just wished I hadn't pulled the 3rd shot in this group right or it would have been awesome. Magnetospeed chrono SD 11 and ES 28 Avg MV 3,310 Temp 54
100 yard target
