Starline Brass

[michsteve]

Starline has a lot of brass ready to order now.
They have 30/06 and 45/70 that have been hard to come by. It says backorder but I have ordered a few times when so called back ordered and have gotten shipments within a week.

Rifle Brass | Rifle, Handgun, and Pistol Brass

 

[Divernhunter]

they make good brass. I use the 45-70, 338fed, 454Casull, and others.

 

[Joec7651]

Just my personal opinion but I think Starline makes the finest 45-70 brass that can be had. Their 308 Win brass seems to be very high quality as well. I aneal every third firing with my 45-70 but I have 9 firings on my oldest batch of 50. Havent had a split case yet, and they still hold onto the primers. Good stuff.

 

[gldprimr]

I’ve used Starline brass in 6.5 Grendel and 30-06. I liked it well enough that I bought probably a life time supply for the 6.5 Grendel.

 

[TexasLife]

The majority of my pistol brass is Starline along with 45-70 in brass and nickel. I still have virgin brass as I purchased up to 2k of each cartridge I reload for (7 pistol, 45-70). I fell into the 7mil realm (7-08) and bought ppu brass (500 pcs) and checked all 500 and all 500 were at saami specs including trim length. No dents in any of it. It might be my go-to brass for now on?

 

[RL338]

I have their 6 and 6.5 Creed brass , it’s good stuff.

 

[Wolfshead]

I have their 30-30, .308 Win, and 30-06.
I don’t think I’m going to use anything else.
I order it as soon as it says “back ordered” and I usually get a notice that it has shipped in about a week or so.

 

[jimbires]

I've used a bunch of their 45acp brass , it's good brass . I don't think I've used any of their rifle brass .

 

[grry10]

I've been using more Starline these days. It started because it was available but I've found it to be good quality.

 

[wvbuckbuster]

I have used it in my 223 and no complaints so I ordered some for the 260rem I picked up awhile back. Dan.