stuck case removal

J

jimbires

Handloader
Aug 16, 2011
3,281
2,167
I just received an email from Brownells advertising this new tool . it looks like a good option to the drill and tap the primer pocket method . although I've never had a problem drilling and tapping the primer pocket to get the stuck case out . just thought I'd pass along this new tool demonstration . it looks like a good idea .

www.brownells.com

Quick Tip: The Best Way to Remove a Stuck Case | Brownells

Join Steve and Caleb from Brownells in another Quick Tip where they demonstrate an effective method for removing a stuck case from a reloading die.
www.brownells.com www.brownells.com
 
That's slick. Way better than having to drill and tap the stuck case. I need to have one one hand just in case. Of course, having this will ensure I don't get another case stuck in a die.

JD338
 
JD338 said:
That's slick. Way better than having to drill and tap the stuck case. I need to have one one hand just in case. Of course, having this will ensure I don't get another case stuck in a die.

JD338
Click to expand...
Of course! The mere threat of having an easy way to remove a stuck case will ensure that it never happens.
 
Here's a video review that this guy did. Warning he is long winded, I jumped ahead several times to speed it up, but a hour long was a little much. Take a look and see if this stuck case remover will work for you. Watch it all the way to the end to see what happens to the tool.

 
I like the looks of this and ease of operation. Shows out of stock at the moment. You stuck case guys must have bought them all:D I'll have to buy one just in case my buddy wants to borrow it;) Dan.
 
ronco said:
Here's a video review that this guy did. Warning he is long winded, I jumped ahead several times to speed it up, but a hour long was a little much. Take a look and see if this stuck case remover will work for you. Watch it all the way to the end to see what happens to the tool.

Click to expand...
Entertaining video at sticking a case , best part of the video. Shannon can be comical at times.
 
Seems the drill and tap is a no fail for real tough stuck cases.
The Frankford tool is neat for moderate stuck cases, makes it a breeze.
Haven't had a stuck case yet. 😉
 
gerry said:
Sometimes it happens just before hunting season and you were a bit low on ammo and had to load some. Not that I would know what that's like😬
Click to expand...
This is why you should own multiple guns in multiple calibers you never want to be in a jam.
 
Haha that's true. Need some overlap for sure. Otherwise you're hunting with 4 rounds of something you're sighted in for and carry other rounds that hit close enough for 200 yards and under 😉
 
I must just be the luckiest reloader in town. I've been handloading for 45 years and have never got a case stuck in a die. Now that I've said it, you know it's gonna happen. LOL

My buddy shoots a lot of BIG Weatherby cartridges. Every now & then he'll get a case stuck in the sizing die. He ships the die to the manufacturer for removal. It's a big waste of time to ship it out when such a good tool is available.

Interesting note: the die company told him to STOP using Hornady One Shot on the big cases and to start using Imperial sizing wax. I gave him a spare can that I had on hand, and he never got a case stuck again.
 
You must log in or register to reply here.

Similar threads

FOTIS
Staball powder on sale
Replies
10
Views
1K
wbm43
W
300WSM
Small base die users finally a good stuck case remover!!
Replies
10
Views
2K
RL338
RL338
J
European skull mounts
Replies
0
Views
686
jimbires
J
cloverleaf
Investment opportunity missed- Really???
Replies
10
Views
2K
SJB358
S
J
Memorial Day sales
Replies
1
Views
630
RL338
RL338
AMMUNITIONAmmunition BULLETSBullets BRASSBrass FirearmsFirearms GearGear
Back
Top