varmint nightmare bullets

corbin9191

Handloader
Dec 2, 2007
724
0
Hey everyone, I bought a 500 pack of these bullets 2 weeks ago and they should be here today. The question is has anyone else tried any of these bullets? I got the 55 grain hollow point for the 223 AR15. I was told they were made by either Nolser or Hornady? Thank you!
 
Never heard of them. Where did you get them from?
What is the BC?

JD338
 
Loading for an AR... do they have cannelures? (Not that you need them, just curious.)
 
Hey guy's just got back from the range and I must say I am a bit surprised at the results. I only tried one powder charge to get started but I tried 5 different brands of brass.
The black groups was PMC brass
The green group was Lack City 06 brass
The red group was WCC brass
The yellow group was R.P. brass
The blue group was FC brass.

I will be playing with seating depths and charges to see if I can get those groups down, especially the PMC group (cheap brass).

All these groups are at 100 yards shooting a a front and rear bag, the temp was 90* and the loads were all mild.

downsized_0628111512-1.jpg
 
I've always had good success with PMC brass. It may be inexpensive, but I never found it to be cheap.
 
DrMike":m5s0zbgk said:
I've always had good success with PMC brass. It may be inexpensive, but I never found it to be cheap.
The best part about all the brass that was tested here was the fact that I got it all free because someone decided to leave it all over the ground at the shooting range :mrgreen:. I expected the Lake city brass to excel over any of the other brass though. I am pretty stoked about these bullets being so cheap $46.00 for 500, and they shoot pretty good. Can't wait to try some out on a few prairie dogs.
 
Back
Top