Search results

  1. M

    Problem with seating depths

    This is what I do: I place a bullet into my dummy case, chamber it into my gun, remove it and measure it for Cartridge Overall Length. I will then push the bullet into the case another .030 to .050 or more if needed. Place the dummy round into the seating die with the Seater Plug backed out...
  2. M

    180 gr 38 cal HG Partition in 35 Remington

    I will be using the bullet in my T/C Contender 35 Rem. The pedals will come off as you can see from the picture at the following link, which I do not see as a bad thing. http://www.noslerreloading.com/phpbb2/v ... +remington As far as being effective on anything bigger than a deer, well I...
  3. M

    Boss settings for 375 260g nosler

    call the Browning, Consumer Department at: 800.333.3288 or 801.876.2711
  4. M

    Partition HG in 35 Rem load

    I used Hodgdon H322 powder. Just so you know, Hodgdon changed their load data for the 35 Remington. They reduced the starting load by 20%. I checked load data from several reloading manuals and came up with a load that I felt comfortable with. I will not be posting that information. I’m not sure...
  5. M

    357 mag

    I took a mid sized doe using 357 Mag 180 Grain Partition Gold (2003). It was a quartering shoot, the bullet entered on the right front chest, broke a rib, passed through the lungs and stopped in the left rear leg. It performed perfectly. If you want to see the recovered bullet go to the...
  6. M

    35 Remington

    It will work just fine. If you check the Nosler Reloading Guide - fifth edition, you will see that there are loads for the 358 Winchester, 35 Whelen and the 350 Remington Magnum using the 180 gr Partition-HG. 8)
  7. M

    Partition HG in 35 Rem load

    Thanks JD338, I'll do that! :grin:
  8. M

    Partition HG in 35 Rem load

    Your right! There is nothing to think about! I have been given a lot of flack for doing this load by people on several forums. I think that I’m going to be very happy with this load in my T/C Contender and my Marlin 336SC. Thanks Nosler for making great bullets!!!!!! :grin:
  9. M

    Partition HG in 35 Rem load

    Hi, I fired three Nosler Partition HG 35 Rem loads that I had worked up into some wet phone books the other day and got the results that I expected for the Nosler Partition HG bullets. The pedals came off but the remainder (76%) of the bullet kept penetrating. I like what I saw, this is what I...
  10. M

    Load Data .44Mag needed

    I have not taken anything with the 44 mag Partition HG, I did take a mid sized doe using the 357 Mag - Winchester Partition Gold 180 grain (2003). It was a quartering shoot, the bullet entered on the right front chest, broke a rib, passed through the lungs and stopped in the left rear leg. It...
Back
Top