140gr accubond data wanted

[rande]

Anyone with reload data for 140gr AccuBond using a 24 inch barrel please submit some good starting and max loads please for the 7mm Rem mag,prefer winchester caseing,,where i live is hard to find any up to date books on the AccuBond and load data

 

[Guest]

What caliber 140gr, and in what cartridge? Or maybe there is just the .277 in a 140? I am not looking at the catalog. Anyway, load data will differ depending on whether you're loading for 270Win, 270WSM, or 270Wby, if that's the bullet in question.

 

[FOTIS]

What caliber 140gr, and in what cartridge? Or maybe there is just the .277 in a 140? I am not looking at the catalog. Anyway, load data will differ depending on whether you're loading for 270Win, 270WSM, or 270Wby, if that's the bullet in question.

Yup...plus you have the 7mm's also for the 140 gr!

 

[rande]

ooops sorry forgot cal and cartridge,,,,,,,,,,7mm Rem Mag,, prefer winchester casing

 

[roysclockgun]

For 7mmRemMag. 70gr of either IMR7828 or MagPro propellant. 140gr AB bullet. New Win. Cases. Win. Mag Primers. A tad over 3200fps chronied.
I started at 68gr and worked up. 70gr in my rifle gave me the highest MV while still maintaining very good groups out to 400 yards.

 

[rande]

has anyone loaded with imr 4350,,,my reloader says to try this powder out,,any load suggestions

 

[roysclockgun]

I tried IMR4370 and the accuracy was good. I settled on IMR7828 because I got accuracy and higher MV to create flatter trajectory.

 

[FOTIS]

Rl 22 or H4831. Start about 65 or so. Should max out at 3250-3350 pending on barrel. :wink:

 

[Powerstroke]

POP,

Yes Sir on the RL's I'll look when I get home, but believe it's the RL-19 and 140gr A.B.'s that give me the cloverleafs in the 7mag.

P.S. Been appreciateing everyones input here......I've become a big RL Fan for several catridges.