300 RUM and 190 gr ABLR
- Thread starter STW
- Start date
Guy Miner
Master Loader
- Apr 6, 2006
- 17,525
- 4,786
I like the possibilities...
- Oct 30, 2004
- 24,073
- 2,593
Cartridge : .300 Rem Ultra Mag
Bullet : .308, 190, Nosler
Useable Case Capaci: 102.740 grain H2O = 6.671 cm³
Cartridge O.A.L. L6: 3.598 inch = 91.39 mm
Barrel Length : 26.0 inch = 660.4 mm
Powder : Alliant Reloder-25
Predicted data by increasing and decreasing the given charge,
incremented in steps of 2.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
-20.0 77 72.80 2518 2675 33471 10770 99.5 1.717
-18.0 79 74.62 2576 2799 35823 10956 99.8 1.673
-16.0 81 76.44 2633 2925 38346 11112 100.0 1.625
-14.0 83 78.26 2689 3051 41044 11243 100.0 1.575
-12.0 85 80.08 2744 3177 43932 11370 100.0 1.527
-10.0 87 81.90 2798 3304 46985 11494 100.0 1.482
-08.0 89 83.72 2852 3431 50214 11615 100.0 1.438
-06.0 91 85.54 2905 3559 53644 11733 100.0 1.396
-04.0 93 87.36 2957 3688 57286 11848 100.0 1.356 ! Near Maximum !
-02.0 95 89.18 3008 3817 61156 11960 100.0 1.317 ! Near Maximum !
+00.0 97 91.00 3059 3947 65267 12069 100.0 1.280 ! Near Maximum !
+02.0 99 92.82 3109 4078 69637 12174 100.0 1.245 !DANGEROUS LOAD-DO NOT USE!
+04.0 100 94.64 3159 4210 74285 12275 100.0 1.210 !DANGEROUS LOAD-DO NOT USE!
+06.0 102 96.46 3209 4343 79230 12373 100.0 1.178 !DANGEROUS LOAD-DO NOT USE!
+08.0 104 98.28 3258 4477 84497 12467 100.0 1.146 !DANGEROUS LOAD-DO NOT USE!
+10.0 106 100.10 3307 4613 90108 12558 100.0 1.115 !DANGEROUS LOAD-DO NOT USE!
Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 10% relative to nominal value:
+Ba 97 91.00 3150 4187 78368 11728 100.0 1.189 !DANGEROUS LOAD-DO NOT USE!
Data for burning rate decreased by 10% relative to nominal value:
-Ba 97 91.00 2921 3600 52029 12564 100.0 1.405
Now that said Q/L does not work well with the RUMs .. EXAMPLE My MAx with 200 AB and 92.5gr of RL25
was fast (3147 fps) and Accurate
Group from my SS Sako 75
Bullet : .308, 190, Nosler
Useable Case Capaci: 102.740 grain H2O = 6.671 cm³
Cartridge O.A.L. L6: 3.598 inch = 91.39 mm
Barrel Length : 26.0 inch = 660.4 mm
Powder : Alliant Reloder-25
Predicted data by increasing and decreasing the given charge,
incremented in steps of 2.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
-20.0 77 72.80 2518 2675 33471 10770 99.5 1.717
-18.0 79 74.62 2576 2799 35823 10956 99.8 1.673
-16.0 81 76.44 2633 2925 38346 11112 100.0 1.625
-14.0 83 78.26 2689 3051 41044 11243 100.0 1.575
-12.0 85 80.08 2744 3177 43932 11370 100.0 1.527
-10.0 87 81.90 2798 3304 46985 11494 100.0 1.482
-08.0 89 83.72 2852 3431 50214 11615 100.0 1.438
-06.0 91 85.54 2905 3559 53644 11733 100.0 1.396
-04.0 93 87.36 2957 3688 57286 11848 100.0 1.356 ! Near Maximum !
-02.0 95 89.18 3008 3817 61156 11960 100.0 1.317 ! Near Maximum !
+00.0 97 91.00 3059 3947 65267 12069 100.0 1.280 ! Near Maximum !
+02.0 99 92.82 3109 4078 69637 12174 100.0 1.245 !DANGEROUS LOAD-DO NOT USE!
+04.0 100 94.64 3159 4210 74285 12275 100.0 1.210 !DANGEROUS LOAD-DO NOT USE!
+06.0 102 96.46 3209 4343 79230 12373 100.0 1.178 !DANGEROUS LOAD-DO NOT USE!
+08.0 104 98.28 3258 4477 84497 12467 100.0 1.146 !DANGEROUS LOAD-DO NOT USE!
+10.0 106 100.10 3307 4613 90108 12558 100.0 1.115 !DANGEROUS LOAD-DO NOT USE!
Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 10% relative to nominal value:
+Ba 97 91.00 3150 4187 78368 11728 100.0 1.189 !DANGEROUS LOAD-DO NOT USE!
Data for burning rate decreased by 10% relative to nominal value:
-Ba 97 91.00 2921 3600 52029 12564 100.0 1.405
Now that said Q/L does not work well with the RUMs .. EXAMPLE My MAx with 200 AB and 92.5gr of RL25
was fast (3147 fps) and Accurate
Group from my SS Sako 75
boomer68
Handloader
- Oct 23, 2006
- 854
- 55
Tagged for interest ;-)
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
- Nov 4, 2004
- 24,388
- 6,738
The 190 gr ABLR from your 300 RUM at 3100 fps will be a long range hammer for sure.
JD338
JD338
DrMike
Ballistician
- Nov 8, 2006
- 36,960
- 5,173
QL released an update on 12 Jan 2014. Mine is ordered, but it may take another week or two before I see it.
Hey Fotis....it seems like you are a proponent of the hornady concentricty checking and correcting tool.
Is that group another demonstration of ammo run past the tool?
(And of course a marksman w/ nerves of steel, a trigger finger as smooth as fine silk, and the eyes of an eagle?) Didn't want to be unfair here...but you DO shoot some phenominal groups!
Is that group another demonstration of ammo run past the tool?
(And of course a marksman w/ nerves of steel, a trigger finger as smooth as fine silk, and the eyes of an eagle?) Didn't want to be unfair here...but you DO shoot some phenominal groups!
boomer68
Handloader
- Oct 23, 2006
- 854
- 55
Any range tests yet?
- Oct 30, 2004
- 24,073
- 2,593
Thank you!
Kraky. That was not with the gauge. That was a test with the torque wrench on the stock screws set at 35 45 55 inch LBS. This group was at 55 inch lbs. Another variable that many do not take into consideration.
Kraky. That was not with the gauge. That was a test with the torque wrench on the stock screws set at 35 45 55 inch LBS. This group was at 55 inch lbs. Another variable that many do not take into consideration.
skidmark
Beginner
- Oct 27, 2013
- 240
- 2
Synthetic or Laminated stock on that 75 ?
Most Sako's are great Shooters
It looks like a keeper.
Most Sako's are great Shooters
It looks like a keeper.
- Oct 30, 2004
- 24,073
- 2,593
Synthetic stainless
