I have a HS precision LA stock with a full 1.25" barrel channel that I use for testing on new guns. I'll probably drop my Edge into it and break it in today and maybe shoot some tonight. I have some more loads to try in various other guns anyway. It's suppose to be 87* here today and tomorrow (which are records are a good margin. The old records are about 80*).
338 300 gr Accubond Loading Data/Range Results thread
- Thread starter Autorotate
- Start date
- Thread starter
- #62
Autorotate
Beginner
- Apr 6, 2012
- 4
- 0
@ 1704 and 1048 yds last night... .372 G7 was "1 MOA rock" spot on for elevation from a zero height 200 yd zero, and a MV of 2785 fps.
29.11 Station pressure, 64 deg F, 70% humidity. 94 gr Retumbo, F215GMs, 3.810 COAL, .0015 NK tension = 3/4 MOA @ 200 yds.
Applied Ballistic Droid app said the 1704 yd shot was right at 1100 fps...it seemed to make the transition well.
Hadn't seen any G7 info out there for this bullet, thought I'd share my intial results.
If you've got feedback (positive/negative) on how this G7 number performed for you....send it! It'd be good to see a good G7 field proven number get hammered out for this bullet.
Here's the story/pics on the rigs doing the shooting...
http://www.longrangehunting.com/forums/f53/straight-shooter-supply-338-lapua-mark-v-96512/
29.11 Station pressure, 64 deg F, 70% humidity. 94 gr Retumbo, F215GMs, 3.810 COAL, .0015 NK tension = 3/4 MOA @ 200 yds.
Applied Ballistic Droid app said the 1704 yd shot was right at 1100 fps...it seemed to make the transition well.
Hadn't seen any G7 info out there for this bullet, thought I'd share my intial results.
If you've got feedback (positive/negative) on how this G7 number performed for you....send it! It'd be good to see a good G7 field proven number get hammered out for this bullet.
Here's the story/pics on the rigs doing the shooting...
http://www.longrangehunting.com/forums/f53/straight-shooter-supply-338-lapua-mark-v-96512/
- Nov 4, 2004
- 25,170
- 8,443
Autorotate
I am shooting a 338 RUM 300 gr AB, using the G7 drag model and a BC of .375 it is spot on at 800 yds.
JD338
I am shooting a 338 RUM 300 gr AB, using the G7 drag model and a BC of .375 it is spot on at 800 yds.
JD338
HOGWILD338-378
Handloader
- Aug 22, 2012
- 1,219
- 0
Just curious if anyone here is shooting the 300's from a 338 Lapua Accumark and what kinda results they were getting on game or target? I really like the fluted Accumarks and my 338-378 really gets my smile on! Which is hard to make happen! I have some to load in 300 AB and also some SMK's also for my Accumark!
- Nov 4, 2004
- 25,170
- 8,443
HOGWILD338-378":1asad43l said:
The 338 300 gr AB on game performance has been good so far.
I did some crop damage control a few weeks back and had excellent results.
This buck was shot at 439 yds.
JD338
DrMike
Ballistician
- Nov 8, 2006
- 37,314
- 5,983
That looks as if it did put the smack-down on that buck, Jim. Yeah, I believe a 300 grain AB will take down game when launched from a 338 RUM.
HOGWILD338-378
Handloader
- Aug 22, 2012
- 1,219
- 0
A few tenderized pieces of backstrap and some 40 weight gravy looks really good about now and it would not take long to make that happen with a nice young buck like that one! 
Nice kill, DRT i would imagine !
Nice kill, DRT i would imagine !
Oldtrader3
Ammo Smith
- Nov 6, 2009
- 8,406
- 5
Judging by the blood coming from the ears, I do not think this deer went far!!
- Nov 4, 2004
- 25,170
- 8,443
Oldtrader3":bnfiren0 said:
Actually, I dropped him in his tracks. I moved his head for a better picture and then turned him over to show the entrance wound.
JD338
- Thread starter
- #70
Autorotate
Beginner
- Apr 6, 2012
- 4
- 0
JD
Good to hear we're only .003 points apart, that could easily be accounted for by an error in our zeros, interpretation of the environmental factors, and our individual barrels. If/when you get a chance to test it at further distances, please post up your findings. I'll do the same if/when I get to shoot at some paper at distance to make a more refined POI call. What twist is your rifle? FWIW, this is a Brux 9.5 twist.
Thanks for sharing.
Good to hear we're only .003 points apart, that could easily be accounted for by an error in our zeros, interpretation of the environmental factors, and our individual barrels. If/when you get a chance to test it at further distances, please post up your findings. I'll do the same if/when I get to shoot at some paper at distance to make a more refined POI call. What twist is your rifle? FWIW, this is a Brux 9.5 twist.
Thanks for sharing.
boomer68
Handloader
- Oct 23, 2006
- 862
- 59
Now we just need some .338-378Wby results. That is one loooooong bullet. I will be getting some for my Bee for sure.
- Nov 4, 2004
- 25,170
- 8,443
msowa
Welcome to the forum.
That is some mighty fine shooting there! Impressive speed you are getting too.
JD338
Welcome to the forum.
That is some mighty fine shooting there! Impressive speed you are getting too.
JD338
Oldtrader3
Ammo Smith
- Nov 6, 2009
- 8,406
- 5
Welcome, great groups and velocity with that 300 AB bullet!
DrMike
Ballistician
- Nov 8, 2006
- 37,314
- 5,983
msowa,
Welcome to the forum. That is some fine shooting. Obviously, that is a great load for your rifle. I'm certain it will attract quite a bit of attention.
Welcome to the forum. That is some fine shooting. Obviously, that is a great load for your rifle. I'm certain it will attract quite a bit of attention.
- Nov 4, 2004
- 25,170
- 8,443
msowa,
Please post a picture of your rig. What barrel and length are you shooting?
The 338 300 gr AB at 2850 fps is impressive.
JD338
Please post a picture of your rig. What barrel and length are you shooting?
The 338 300 gr AB at 2850 fps is impressive.
JD338
Pics to follow.
30" McGowan 1-10 #8
Barker Machine Works M24 action
manners, Jewel, and Razor
Need to verify case volume vs standard lapua brass but for reference I was at 99gr retumbo this morning pushing Sierra MKs at 2931 w/ ES of 6. Don't have a full length sizing die yet so I'm stopping there.
Sure wish the NAB's could be purchased in bulk to bring the prices down.
30" McGowan 1-10 #8
Barker Machine Works M24 action
manners, Jewel, and Razor
Need to verify case volume vs standard lapua brass but for reference I was at 99gr retumbo this morning pushing Sierra MKs at 2931 w/ ES of 6. Don't have a full length sizing die yet so I'm stopping there.
Sure wish the NAB's could be purchased in bulk to bring the prices down.
Oldtrader3
Ammo Smith
- Nov 6, 2009
- 8,406
- 5
Nice! It surely does shoot well also.
