6MM REM. ACKLEY ADVICE/HELP NEEDED

[coyotewallace]

I just picked up a 26"1-10" twist bullberry 6mm Rem. AI barrel for my encore an I could use all the info I can get on this cartridge such as fireforming loads,best bullets an powder combs anyone might be able to help me with.THX!!
Chuck

 

[JD338]

coyotewallace,

Try here:
http://www.angelfire.com/sd/6mmackley/mikesloads.html

Regards,

JD338

 

[Accubond Believer]

Coyote Wallace -

I have 2 - 6 AI's and love them. I use 48 gr of H4831 with a 87 gr VMax for a firefrom load. (24" barrel = 3100fps) Seat the bullet touching the lands to assist in "blowing out the shoulder" The 6 looks really good with a set of 40 degree shoulders. I have a page of reloading notes if you are interested. But due to it being a "wildcat cartridge" it definitely is a work up your own loads. The above load is almost max for a standard 6mm.

Good luck with the 6 AI

Steve D. the HP

 

[coyotewallace]

Steve,
yes any info. you have on this cartridge i am interested in...
you can email me at (furflyer@hotmail.com)THX!!or my fax # is
253-987-5147
my home# is 253-987-5111