My latest 7mm Rem Mag has a 26" bbl and I used R26/160 SBTHP and R33/175 SBT; around 3150 for the 160 and 3050 with the 175. In your 24" bbl you should hit your goals easily. I used a Fed 215M primer in ww Cases. Do a seach and you will see what these guys posted for me with QL and these two newer powders. To be honest, I almost pulled my hair out ( I had a lot more of it then too!) back in the late 70's/early 80's trying to get 3100 from the 160 PT out of a 24" Mod 700. Back then I used H870, 7828 and MRP ( just about identical to R22) I settled on...tada..IMR 4350 and 2950. It killed like crazy, so no biggy....but I just "wanted" that 3100! ha. 35yrs later I got it...in a 26" bbl. You can find a 26" Savage 7mm rem mag bbl and have put on a lot easier than reaming out a 24"bbl to a wildcat. So, I hope you get your goals and I wouldn't worry about what I said IF you aren't an OCD inclined, far gone wilidcat influenced handloader, ha! BTW, I have relatives down in SE Texas ( read lots of mud/rain) who use identical Savage rifles as yours in 7 mag and factory ammo. They get those rifles plumb filthy, wipe them off and go hunting! They couldn't tell you what weight bullet most of the time or speed in their rifle. They sit around at night and argue about calibers, etc and shoot their deer/hogs around 100yds most of the time, ha. Every now and then, one will snipe one off the pipeline around 300yds....he then becomes "insufferable"....like me, ha! Good luck to you Pard.