Ridge_Runner
Handloader
- Sep 29, 2006
- 1,388
- 739
of a smith who will thread a shotgun barrel for screw in chokes? need a NEF 10 ga. threaded
thanks
thanks
anyone know
- Thread starter Ridge_Runner
- Start date
- Nov 4, 2004
- 25,341
- 8,899
I would think any competent gunsmith could do that work for you.
JD338
JD338
- Thread starter
- #3
Ridge_Runner
Handloader
- Sep 29, 2006
- 1,388
- 739
my local smith says he called Briley and one other and they don't make a reamer for a 10 ga. for some reason or another.
- Nov 4, 2004
- 25,341
- 8,899
Do you have 10 ga screw in chokes?
Are they available?
JD338
Are they available?
JD338
- Thread starter
- #5
Ridge_Runner
Handloader
- Sep 29, 2006
- 1,388
- 739
you can buy them from indian creek, true choke, jebs and a few others
- Nov 4, 2004
- 25,341
- 8,899
Maybe try Williams Gunsight in Davison MI.
They do excellent work. They built my 280AI and 338 RUM.
JD338
They do excellent work. They built my 280AI and 338 RUM.
JD338
1100 Remington Man
Handloader
- May 1, 2007
- 1,168
- 334
Send it to Briley !
gerry
Ammo Smith
- Mar 1, 2007
- 6,908
- 1,791
You're a better man than me, that's going to have some recoil! Wish I had bought one of those when NEF was making them.
truck driver
Ammo Smith
- Mar 11, 2013
- 7,342
- 924
Years ago I watched a gun Smith install choke tubes in a shotgun barrel. He would cut several inches off the barrel to get rid of the factory choke. He would then expand the barrel to get a straight surface too ream and thread.
Be aware that there will be a bulge in the barrel at the back of the choke tube.
Be aware that there will be a bulge in the barrel at the back of the choke tube.
Darryle
Beginner
- Aug 19, 2020
- 75
- 152
Steve Rose @
Rose Action Sports
He's done several for me, usually the Browning Invector in Mossberg 930 HD barrels. Excellent work and short turn around times.
Rose Action Sports
He's done several for me, usually the Browning Invector in Mossberg 930 HD barrels. Excellent work and short turn around times.
