- Oct 30, 2004
- 24,053
- 2,546
58 grains H4350
Deer Loads for the 30-06 165 gr BT
- Thread starter JD338
- Start date
- Thread starter
- #23
- Nov 4, 2004
- 24,346
- 6,655
Thank you fellas, I appreciate your inputs. We should get started next week and I'll keep you posted.
JD338
JD338
noslerpartition
Handloader
- May 26, 2018
- 996
- 355
Guess it was all said, just not by everybody ;-)
I used the 4350 with accubonds, too, back when I could use lead.
They did as expected.
Once killed two small boar with one shot at 170y - did not see the second one in the back.
Complete pass through on both, through the spine of the second.
I would not worry at all with that combo...
Gesendet von meinem HUAWEI VNS-L31 mit Tapatalk
I used the 4350 with accubonds, too, back when I could use lead.
They did as expected.
Once killed two small boar with one shot at 170y - did not see the second one in the back.
Complete pass through on both, through the spine of the second.
I would not worry at all with that combo...
Gesendet von meinem HUAWEI VNS-L31 mit Tapatalk
stew":3l6i58kr said:
That's a good bullet. Soft enough to do the job on whitetails. The 165 BTSP is another one that is soft enough to do the job well a ways out there.
It's hard to get a do all bullet. No fault of the manufacture's. The bullet that performs admirably and doesn't come apart on an elk shoulder, wont be the best choice for whitetails. The speer Bt's, not the hot cor's, seem to be soft across the board by all accounts, regardless of caliber or bullet weight.
