after reading a few of the threads this morning I had a thought . I've just about turned my reloading into a science project . I can tell a lot of other guys have too . does anyone just reload the simple way ? by this I mean , keep brass somewhere between min and max they don't have to be all the same , dump the powder and weigh the charge every 5 or so loads to be sure the powder throw is on track , seat the bullets and measure off the tip just check a random one every here or there . clean primer pockets , are you nuts , I can still get a primer in there . I think back of how simple my process was , I can't believe all my ammo went boom .