I really think this will work

[Alderman]

Retried 72 grains of Reloader 19 with Nosler 225 Accubonds in the 338.
Just made slight adjustments to OAL to see if it would make any difference.
The 3.340 load went .60 with three shots.
I could spend a lot of time trying to close that up but with my known shooting ability and what I need for elk hunting it certainly wouldn’t be for any practical purpose.

Shot the first three pretty fast and then the rest with a two minute delay using the chamber chiller to cool the barrel between shots.

Sent from my iPhone using Tapatalk

 

[Guy Miner]

Yup. That will work!

 

[ShadeTree]

Yes sir that will do the trick all day every day! Good shooting.

 

[SJB358]

Yup. That will work!

Yup, I'd run it out to zero distance have fun with it now.

 

[remingtonman_25_06]

Nice! A lot can happen in .010" increments. That's plenty good for elk. Now go throw a 200 or 300 yard zero on it and have fun!

 

[JD338]

Nicely done. Looks like you are set to go.

JD338

 

[gerry]

That final tweak to the seating depth sure paid off for you. Hard to imagine a better elk or moose round than what you have there, good luck this fall!

 

[loganht1]

Have you ran the math / software / calculations for chamber pressures and muzzle velocity? Or chronographed this load? I didn't se your earlier thread.

Sent from my SM-G950U1 using Tapatalk